- Thread starter
- #361
FWIW I have a 1st gen cummins overflow bottle that mounts to the core support next to the rad if you want it.
Chris
You know what I'm using now
. It works great. Is the standard first gen that size or close to it?
Builds Building a Tow Rig (1 Viewer)
- Thread starter D'Animal
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
You know what I'm using now
. It works great. Is the standard first gen that size or close to it?
this rig is insane...that is all.
- Thread starter
- #363
Earning it's keep.
Part #1
Part #1
- Thread starter
- #364
Earning it's keep.
Part #2
Part #2
Wheres the 40 off to?
- Thread starter
- #366
Fingers crossed for you.
You've definitely got a setup to be proud of!
You've definitely got a setup to be proud of!
- Thread starter
- #368
Earning It's Keep
Part # 3
Part # 3
Another smog shop run?
- Thread starter
- #370
- Thread starter
- #371
I stopped in Bakersfield and took my old Speedometer cable to have a new one made. The original was about 12" too short.
OMG!
It was like I walked back in time. This little old school race shop had every speedometer, gauge, doo-hickey thing you could put on an engine. The Owner has two world records from Bonnaville.
The sevice was faster than McDonalds.
OMG!
It was like I walked back in time. This little old school race shop had every speedometer, gauge, doo-hickey thing you could put on an engine. The Owner has two world records from Bonnaville.
The sevice was faster than McDonalds.
- Thread starter
- #372
Mirrors installed.
I was in a hurry so I did not get them blasted and powder coated yet.
I was in a hurry so I did not get them blasted and powder coated yet.
- Thread starter
- #373
The rear view mirror view.
- Thread starter
- #374
So I'm getting the FJ40 1/2 ready to go to SnT.
I fire up this rig this morning to go into town and pick up another club memebrs rig and drag it back to the shop so he can get it to SnT.
This rig starts pee'ing fuel out of the fuel pump. Not the machanical one but the main pump. The return line is connected and it seems to be coming out of the back bottom of the pump.
I fire up this rig this morning to go into town and pick up another club memebrs rig and drag it back to the shop so he can get it to SnT.
This rig starts pee'ing fuel out of the fuel pump. Not the machanical one but the main pump. The return line is connected and it seems to be coming out of the back bottom of the pump.
Did ya get that last nut on the pump and get it running yet?
- Thread starter
- #376
Nope.
Can't find the correct wrench.
I'll have to modify the one I have.
Can't find the correct wrench.
I'll have to modify the one I have.
That would be Fleet Speedometer. They have a outside dyno for calibrating speedos. Did you get the fuel leak fixed?
- Thread starter
- #378
I got the Injector Pump back on. I made the rookie mistake of connecting everything before I tightened everything down. I cannot get the pump indexted on the scribe marks I made before removal.
I blows a lot of white smoke when starting and runs rough for about 30 seconds and then everything clears up and runs fine. When you goose the throttle, a puff of black smoke comes out until warm.
I blows a lot of white smoke when starting and runs rough for about 30 seconds and then everything clears up and runs fine. When you goose the throttle, a puff of black smoke comes out until warm.
Last edited:
The white smoke is an indication of incorrect injection timing.
- Thread starter
- #380
Loosing Mileage
In Sept I drove my 6BT /Getrag/NV205 72 GMC 1-Ton 4x4 w 4:11's on 35"s from central California to South East Iowa.
On the road trip, I had a mechanical problem in Evenston WY that DieselCruiserHead helped me out on. It was a stuck thermostat that did not show up until 7,000 elevation.
I was doing mostly 58 - 62 mph. Those of you who have drivin I-80 know that from Cheyene WY it is pretty much all down hill to Iowa. Round trip I got 19.6 mpg.
I had no other issues with the rig. Ealry Nov I went out to start my truck and I had fuel coming out of the injector pump in places that it should have not been.
I pulled the pump and had it rebuilt at the local Diesel Injector/Pump rebuild shop. I reinstalled the pump and set the timing correctly. The pump was rebuilt to standard specs, no upgraded springs, plungers or anything. It is outlined in this thread.
I just drove my rig pulling my trailer with a Land Cruiser on it about 1,800 miles over last weekend. Visalia to Calico to Eureka and back to Exeter. I burned 3 quarts of oil during the entire road trip.
Dring the road trip, I averaged 7 mpg. Doesn't matter if I was pulling a trailer with a Land Cruiser on it or jsut pulling an empty trailer.
It puffs very very little white smoke at start up and during throttle up when it is still warming up. When pulling my trailer with a rig on it and the first ecceleration going up a hill I see a vapor cloud come out of the tailpipe but only if someone is behind me with their lights on. You cannot see the vapor cloud in the day time.
My first thought was a cracked head but I'm not loosing any anti freeze at all. There is no "pressure" coming out the oil fill hole like it has a scored piston/stuck ring. There is very little oil residue coming from the crank case vent pipe. After a hard pull through some mountain passes, I pulled in for a fuel stop. After sitting about 10 minutes there was a spot about the size of a nickle under the crank case vent hose. I double checked everything and found no leaks anywhere.
Any suggestions? Am I expecting too much from my rig?
Thanks
In Sept I drove my 6BT /Getrag/NV205 72 GMC 1-Ton 4x4 w 4:11's on 35"s from central California to South East Iowa.
On the road trip, I had a mechanical problem in Evenston WY that DieselCruiserHead helped me out on. It was a stuck thermostat that did not show up until 7,000 elevation.
I was doing mostly 58 - 62 mph. Those of you who have drivin I-80 know that from Cheyene WY it is pretty much all down hill to Iowa. Round trip I got 19.6 mpg.
I had no other issues with the rig. Ealry Nov I went out to start my truck and I had fuel coming out of the injector pump in places that it should have not been.
I pulled the pump and had it rebuilt at the local Diesel Injector/Pump rebuild shop. I reinstalled the pump and set the timing correctly. The pump was rebuilt to standard specs, no upgraded springs, plungers or anything. It is outlined in this thread.
I just drove my rig pulling my trailer with a Land Cruiser on it about 1,800 miles over last weekend. Visalia to Calico to Eureka and back to Exeter. I burned 3 quarts of oil during the entire road trip.
Dring the road trip, I averaged 7 mpg. Doesn't matter if I was pulling a trailer with a Land Cruiser on it or jsut pulling an empty trailer.
It puffs very very little white smoke at start up and during throttle up when it is still warming up. When pulling my trailer with a rig on it and the first ecceleration going up a hill I see a vapor cloud come out of the tailpipe but only if someone is behind me with their lights on. You cannot see the vapor cloud in the day time.
My first thought was a cracked head but I'm not loosing any anti freeze at all. There is no "pressure" coming out the oil fill hole like it has a scored piston/stuck ring. There is very little oil residue coming from the crank case vent pipe. After a hard pull through some mountain passes, I pulled in for a fuel stop. After sitting about 10 minutes there was a spot about the size of a nickle under the crank case vent hose. I double checked everything and found no leaks anywhere.
Any suggestions? Am I expecting too much from my rig?
Thanks
