Builds Build: Rusty Pumpkin Project 74' FJ40

[bdawg23]

Hi Brandon, sorry I haven't been keeping up with your thread!
That is a 1F air cleaner and a 2F carb which don't really jive.
I would also HIGHLY advise against your fuel hose. Rubber fuel hose, with fuel being pumped through it, directly over an exhuast manifold is not safe. I have seem Land Cruisers catch on fire from this.

I also have the proper Toyota plugs for your cylinder head in stock as well

Hey Matt!! Thanks for guidance here.

I have an adapter that might work for the air cleaner, I’ll share my results.

Heard on the fuel line - will replace it with a metal line.

I have ngk bpr5egp plugs installed currently, are these not correct or not proper?

I keep wishing your shop was closer so I could drop this thing off. My knowledge gaps keep getting bigger the further this project moves along

 

[cruisermatt]

Hey Matt!! Thanks for guidance here.

I have an adapter that might work for the air cleaner, I’ll share my results.

Heard on the fuel line - will replace it with a metal line.

I have ngk bpr5egp plugs installed currently, are these not correct or not proper?

I keep wishing your shop was closer so I could drop this thing off. My knowledge gaps keep getting bigger the further this project moves along

My guys make really nice stainless lines for the carb, if you want we can send you one. We have to replace that on most 2F's

Not sure on the plugs, we use the OEM plug which are actually less expensive from Toyota then anywhere else.

We don't really do anything special in terms of work here, we just use and stock all the correct parts so our repairs don't have to wait forever. These are simple trucks.
Happy to provide as much private guidance/support as you need as long as you are buying your parts through me.

 

[bdawg23]

My guys make really nice stainless lines for the carb, if you want we can send you one. We have to replace that on most 2F's

Not sure on the plugs, we use the OEM plug which are actually less expensive from Toyota then anywhere else.

We don't really do anything special in terms of work here, we just use and stock all the correct parts so our repairs don't have to wait forever. These are simple trucks.
Happy to provide as much private guidance/support as you need as long as you are buying your parts through me.

Appreciate this Matt!