Bought used oem distributor and ohms are not with in specs. Will it work? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 15, 2020
Threads
1
Messages
2
Location
71842
I bought an oem used distributor, because my pick up coils were bad. Ad said it was tested good. Upon delivery, I unboxed and immediately checked the ohms on the pick up coils one reads 333 the other reads 166. According to the fsm both are put of spec. Should I send it back or put it in? They said it tested good.
20201022_152224.jpg
20201022_152234.jpg
 
I think you already know the answer...
 
Send it back. Might be better off with aftermarket Dizzy if money is tight.
Someone on the forum installed a cheapo ? $70 new Dizzy and it worked.
Check Rockauto, cheapest is around $140 now.


Cheapest OEM is here (if you buy from them report back):

 
Send it back. Might be better off with aftermarket Dizzy if money is tight.
Someone on the forum installed a cheapo ? $70 new Dizzy and it worked.
Check Rockauto, cheapest is around $140 now.


Cheapest OEM is here (if you buy from them report back):

Thank you!
 

Users who are viewing this thread

Back
Top Bottom