Blackmamba

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Thanks,

Is it the polyurethane body mounts, bought at www.sor.com;

Yes, it is the FJ80 master brake cylinder, bought at www.drivewire.com;
The brake cylinder booster is the 1982 BJ40 original part.

Sinse the bellhousing was in contact with the firewall, i had to increase the body. I made a 2,5cm Teflon mounts and added to the polyurethane ones.

Best Regards,
 
Last edited:
Very nice mod! Engine sounds great! :cheers:

What next? SOA?? :hhmm:
 
Yes indeed!

I have already the 3 hole spring perches, the hi steer, the anti warp support, and many other parts.

I also studied, in the Tech Section, the Andre Shoumatoff (Complete Overview to the SOA) many times.

The cut and turn should be the best part :bang:
 
More Stuff to install :wrench:

Blue Sea Systems - 12 Circuit with Negative Bus:

imag0537m.jpg


Ballistic Fabrication - Weld Plugs

imag0538.jpg
 
Having problems with the pictures for some reason , I dont see them.
 
Now it time to return to the garage and make some adjustments:

Cut the right wing of the oil pan








 
I also turned the parking brake support and made some heavy duty t-case armor :grinpimp:







 

Users who are viewing this thread

Back
Top Bottom