before and after shots (1 Viewer)
- Thread starter crushers
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
crushers
post ho
- Thread starter
- #23
thanks guys,
i am heading out wed morning and if the weather is nice i will be crossing over at either waterton lakes or at roosville(sp?) stopping off in spokan for some excellent smoke chilli then stopping off to check out Rob's work on Bob's 1HZ install in Bend Oregon and then down the ocean highway with a stop at Fisherman's warf.
from there i might stop off at Brett's for the night and the little pub in Folson so Berni can meet the locals. and on down to San Deigo ...
at least that is the so called route till it changes. if the weather is bad then straight out the # 1 and cross over by abostford...
cheers
i am heading out wed morning and if the weather is nice i will be crossing over at either waterton lakes or at roosville(sp?) stopping off in spokan for some excellent smoke chilli then stopping off to check out Rob's work on Bob's 1HZ install in Bend Oregon and then down the ocean highway with a stop at Fisherman's warf.
from there i might stop off at Brett's for the night and the little pub in Folson so Berni can meet the locals. and on down to San Deigo ...
at least that is the so called route till it changes. if the weather is bad then straight out the # 1 and cross over by abostford...
cheers
Last edited:
crushers said:
If you end up going through Abby you know the door is always open, even if I can't be around. I am back on light duties at work, and am working days till Thursday...off at 17:00. Understand if you are on a timeline and can not...or even just need the can and a cup-a-java. Just give me notice.
gb
crushers
post ho
- Thread starter
- #25
thanks for the offer Greg, no tight time line at this point.
spent the afternnon building a lap top support for the drive down... it was fun, i have not played with my cabinate makeing skills for quite some time... turned out pretty darn good if i have to say so myself...
cheers
spent the afternnon building a lap top support for the drive down... it was fun, i have not played with my cabinate makeing skills for quite some time... turned out pretty darn good if i have to say so myself...
cheers
HZJ60 Guy
Tank Buster
Hey Wayne, ifn youre going to be around Seattle let me know. Id love to see that there 70.
Have a safe drive.
Tom
Have a safe drive.
Tom
Wayne,
I know I'm a silly noob, but if you need anything in Northern California let me know.
Brendan
I know I'm a silly noob, but if you need anything in Northern California let me know.
Brendan
lowenbrau
SILVER Star
crushers said:
Used to be i coul'n't even spell lectrishun... now I are one!
Have a good trip, Wayne and Berni. Pick up some of those chocolate covered expresso beans from Ghiradelli if you're in San Fran in the daylight.
Wayne,
what day do you think you'll make it here? Have you got all my numbers? Hmmm...maybe you can check out my waste gate issue while youre here
B
what day do you think you'll make it here? Have you got all my numbers? Hmmm...maybe you can check out my waste gate issue while youre here
B
crushers
post ho
- Thread starter
- #33
i am off on a 1/2 hour give me a call so i can get your numbers off yah...i am thinking sometime early next week, depends how much shopping and sight seeing we want to do...
be happy to check out the situation, not sure i can fix it but i am willing to try...
cheers
be happy to check out the situation, not sure i can fix it but i am willing to try...
cheers
Moose,
Did you take your roll bar off of your BJ70 ragtop, I do not see it in the picture.
Michael
Did you take your roll bar off of your BJ70 ragtop, I do not see it in the picture.
Michael
moose_sv1000s said:
Rest of the Mods going into this sweet cruiser
Here is a list of the rest of the mods going in this Sweet cruiser very shortly:
Propane injection
Cable Lockers front and rear
aftermarket Rotors and bigger calipers
Intercooler (proably after Moab)
Custom Rear bumnper/air/pi/tire rack (after Moab)
Cheers,
Michael
Here is a list of the rest of the mods going in this Sweet cruiser very shortly:
Propane injection
Cable Lockers front and rear
aftermarket Rotors and bigger calipers
Intercooler (proably after Moab)
Custom Rear bumnper/air/pi/tire rack (after Moab)
Cheers,
Michael
before (stock cept for recaros ):
after (snorkle,lights,consoles,tyres,oba):
after (snorkle,lights,consoles,tyres,oba):
Last edited:
tlcruiserman said:
Just for the photo. I wouldn't drive around without it as my head would become the tallest thing on the truck.
It comes off fairly easily, make sure to disconnect the cabin light.
I wish the soft-top came off a lot easier, one of the reasons I was asking around about that fast-back unit.
I guess the valve cover is different because it's an 89 or something. My 88 has a 3B-II and the valve cover is indistinguishable from the regular 3B in my BJ-42.
