Paypal details please... I want one ...... A Blank possibly though..... I have a 140 amp dual battery VSR that i'd like to mount there.... that gives me the perfect mounting for it .... how much ?
ARCHIVE Battery Disconnect Overkill...my OCD will be my downfall
- Thread starter NLXTACY
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Well, this thing is just too cool. Can I still get in on one complete? I probably missed it in the thread, but what is the final price (I saw the initial $300 guesstimate )? Thanks
I've heard of "property poor", and "house poor", and, "car poor", but not "Flaming River disconnect poor"! Anyway, I'm in when you make 'em.
That is nice! I'm guessing not one of the cheapy's that are 16" long with plastic handles. The decent ones I saw recently were up to $250.
That's why I got "cheapy" and went with one of these bad boys:
16 Tons and $50!
It crimps 1AWG terminals like buttah, and for how often I'll actually use it, Meh...
It's even easily repairable if it springs a leak.
Yours is a more impressive tool though.
.
That's why I got "cheapy" and went with one of these bad boys:
16 Tons and $50!
It crimps 1AWG terminals like buttah, and for how often I'll actually use it, Meh...
It's even easily repairable if it springs a leak.
Yours is a more impressive tool though.
.
This will integrate with the OBA system somehow, I just know it. I can't wait!
DominicanFZJ80
Getting there...
As soon as this is released I will be hitting the "Add to Cart" button...!
NLXTACY
Wits' End
- Thread starter
- #170
Its close. I will feel a lot better accepting orders once the LX Lockbox and Orange Hub Fan Clutches get sent out at least. The York I'm not too worried about since its moving forward nicely and nothing has been presented to me as a possible roadblock. I was doing one more wiring run on this and made some other decisions about gauge placement to just make my life easier. Its getting really close.
NLXTACY
Wits' End
- Thread starter
- #173
Well, I have some good news...
Since the Orange Hub Fan Clutches have all shipped out to their new owners,
AND
Since the LX450 Tall LockBoxes have all shipped out to THEIR new owners,
AND
Since the LX450 Mini LockBoxes are now in my truck ready to be powder coated,
AND
Since the LC 80 Series Scout Lockboxes are also in my truck ready to be powder coated,
I can now officially launch this bad boy!!! I'll be sending out an email blast so be sure to look for it. All of the wiring for this is done. The 12v coiled probe is ready and all that is left to do is remove my ground cables and measure them out to be replaced with 1/0.
Right now I don't have final final pricing but I will when the newsletter goes out so look for it!
Currently the options will be:
1. Bracket by itself- for those that want to install all of their own stuff and have the machinery and know how to do so
2. Bracket with Battery Disconnect only- no other wiring and no other holes in the bracket
3. Full bracket wired kit w/o gauge- this means no hole for gauge or switch
4. Full bracket wired kit w/temp gauge- exactly as seen in the photos
5. Full bracket wired kit w/2 gauge holes- no gauges included but will have two gauge holes
There will also be a separate build for the Blue Sea ACL but I have a few more things to figure out before I start showing that one.
All of the wiring is ready to go. Its mostly plug-n-play depending on the options.
Since the Orange Hub Fan Clutches have all shipped out to their new owners,
AND
Since the LX450 Tall LockBoxes have all shipped out to THEIR new owners,
AND
Since the LX450 Mini LockBoxes are now in my truck ready to be powder coated,
AND
Since the LC 80 Series Scout Lockboxes are also in my truck ready to be powder coated,
I can now officially launch this bad boy!!! I'll be sending out an email blast so be sure to look for it. All of the wiring for this is done. The 12v coiled probe is ready and all that is left to do is remove my ground cables and measure them out to be replaced with 1/0.
Right now I don't have final final pricing but I will when the newsletter goes out so look for it!
Currently the options will be:
1. Bracket by itself- for those that want to install all of their own stuff and have the machinery and know how to do so
2. Bracket with Battery Disconnect only- no other wiring and no other holes in the bracket
3. Full bracket wired kit w/o gauge- this means no hole for gauge or switch
4. Full bracket wired kit w/temp gauge- exactly as seen in the photos
5. Full bracket wired kit w/2 gauge holes- no gauges included but will have two gauge holes
There will also be a separate build for the Blue Sea ACL but I have a few more things to figure out before I start showing that one.
All of the wiring is ready to go. Its mostly plug-n-play depending on the options.
NLXTACY
Wits' End
- Thread starter
- #174
A few more photos...
AutoMeter Water Temp gauge comes as an option and includes the switch to check upper and lower hose temps
The Voltmeter displays voltage for the 12v+ probe, the Main and Aux batteries both with engine off and with motor on to test alt voltage.
12v Constant Hot Blue Sea plug for use with 12v compressors or LED work light or?
All wiring is complete and the Blue Sea fuse panel has space for three more circuits.
The Flaming River disconnect's handle is removable for added security.
AutoMeter Water Temp gauge comes as an option and includes the switch to check upper and lower hose temps
The Voltmeter displays voltage for the 12v+ probe, the Main and Aux batteries both with engine off and with motor on to test alt voltage.
12v Constant Hot Blue Sea plug for use with 12v compressors or LED work light or?
All wiring is complete and the Blue Sea fuse panel has space for three more circuits.
The Flaming River disconnect's handle is removable for added security.
DominicanFZJ80
Getting there...
A thing of beauty! I will be purchasing one as pictured.
Well done sir, very well done!
Well done sir, very well done!
Dirty Koala
SILVER Star
Very nice.
Do you have any pics of how it would look with two guages?
My application is slightly different than most since I have a cummins transplant. Would be nice to also have an oil pressure guage.
Do you have any pics of how it would look with two guages?
My application is slightly different than most since I have a cummins transplant. Would be nice to also have an oil pressure guage.
Good timing, I just got started on removing my nasty rats nest of wire mess tucked in front of my battery and working towards a separate fuse block. Now i will have room for this!
Looking forward to seeing one of these in some form under the hood.
Similar threads
