Hell Yeah! Nice job Joey!
ARCHIVE Battery Disconnect Overkill...my OCD will be my downfall
- Thread starter NLXTACY
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
NLXTACY
Wits' End
- Thread starter
- #182
Come and get in on THIS action:
Wits' End Power Solutions
I have all of the components to make about 20ish systems EXCEPT for the stainless steel bracket itself. Since I'm moving ahead with zero changes to the file the metal shop has then I can go ahead and start them cutting and bending as soon as tomorrow. It will take FOR SURE at least three weeks to have the metal done, powder coat and laser. This time around I have everything else in stock so I;m crossing my fingers on this one.
The only option I currently have is for the complete kit and that is to add the Water Gauge.
I *can* take requests, within reason, on holes to have have pre-cut or at least pre-tabbed. I can also have the laser etching change on a whim. That being said, only those who are in the pre-sale will get the options to add/remove holes and tailor the laser etching to their individual system. After that its whatever I have in stock is how it comes. Again...REASONABLE REQUESTS WILL BE CONSIDERED. Unreasonable requests will be mercilessly mocked...publically
What is currently not shown in images is the 12v+ voltmeter probe and the 1/0 ground cables. I will do those next. But I will also have some questions for you all concerning the ground cables which I'll get into later.
Wits' End Power Solutions
I have all of the components to make about 20ish systems EXCEPT for the stainless steel bracket itself. Since I'm moving ahead with zero changes to the file the metal shop has then I can go ahead and start them cutting and bending as soon as tomorrow. It will take FOR SURE at least three weeks to have the metal done, powder coat and laser. This time around I have everything else in stock so I;m crossing my fingers on this one.
The only option I currently have is for the complete kit and that is to add the Water Gauge.
I *can* take requests, within reason, on holes to have have pre-cut or at least pre-tabbed. I can also have the laser etching change on a whim. That being said, only those who are in the pre-sale will get the options to add/remove holes and tailor the laser etching to their individual system. After that its whatever I have in stock is how it comes. Again...REASONABLE REQUESTS WILL BE CONSIDERED. Unreasonable requests will be mercilessly mocked...publically
What is currently not shown in images is the 12v+ voltmeter probe and the 1/0 ground cables. I will do those next. But I will also have some questions for you all concerning the ground cables which I'll get into later.
Nice, I'm in on payday
REASONABLE REQUESTS WILL BE CONSIDERED. Unreasonable requests will be mercilessly mocked...publically
Can I have pictures of girls in bikini on the beach on the bracket?
Thanks for the Instagram link to this Joey. You Sir, are a madman.
Not sure where I want to spend all my money theses days, with you, or Slee.
Killing me bro.
Not sure where I want to spend all my money theses days, with you, or Slee.
Killing me bro.
MeowSlee has money
I have a cat to feed
Before you posted that my first thought was....
"wait, he has a hot wife like I do, that's certainly more expensive than the cat"
And then... "By cat I mean...."
Freakin women...
NLXTACY
Wits' End
- Thread starter
- #192
So I officially sold the very first unit!!! Woohoo!
Bummer that the interest kind of died on this. Wish I kept better tabs on the demand so that I could have focused on other projects. Oh well, I'll learn
Here are my two boxes of Flaming River disconnects and my assembly bins for the disconnect mounts.
I'd love to hear back to see if this is something to indeed walk back or keep moving forward. I have to just turn on the metal work.
Bummer that the interest kind of died on this. Wish I kept better tabs on the demand so that I could have focused on other projects. Oh well, I'll learn
Here are my two boxes of Flaming River disconnects and my assembly bins for the disconnect mounts.
I'd love to hear back to see if this is something to indeed walk back or keep moving forward. I have to just turn on the metal work.
Dirty Koala
SILVER Star
With the level of investment I have in my rig and knowing what insurance would value my rig at, it only makes sense to add some electrical fire protection. Looking forward to getting one installed.
So are you killing the project for now?! Damn it I was just convincing myself that this was mandatory after my shortbus.
NLXTACY
Wits' End
- Thread starter
- #195
HA! I can't kill it now. I'm waaaaay to invested in this thing. I made sure to pre-order EVERYTHING except for the metal because I wanted to make sure everyone had options. But its tough to do if the interest died. It would be good to get a roll call for those that are still interested or those that are on the fence. I'd love feedback on what is holding you all back. I don't want to push, just curious. For those that do order I just need to change my metal order as prototype onsies twosies instead of a bulk order. It is what it is.
I'm in
Complete unit
I'm still in.
Joey, the actual battery disconnect unit is the deterrent factor for me. I mean the bracket is your baby, but the Flaming River is what kills it for me.
I've been looking around for some alternatives to FR and I might just get the bracket from you.
I've been looking around for some alternatives to FR and I might just get the bracket from you.
Similar threads
