Axle shaft specs?

[woytovich]

Looking for measurement specs for full floating front and rear axle shafts both with and without factory electric lockers. Overall lengths & spline lengths... Is there a chart/reference for that here somewhere? (I've searched to no avail)

This is the best I've found so far:

Cruiser Outfitters

Cruiser Outfitters

Thanks

 

[woytovich]

This from the RCV website for the front (is the rear the same?)

"long side inner shaft is designed with 4.5" of splines at the differential to fit the factory E-Locker."

Ultimate 30 Spline Axle Set for Toyota LC 40/55 Series ('76-'84) & 70 Series ('84-'90) with 4.5" Spline for Factory E-Locker on Long Side

Manufactured in the U.S. using only high-strength chromoly materials, RCV Performance Ultimate 30 spline CV Axle set simply replaces your weak Toyota axle shafts with a new high-strength design. The factory axles were designed with 30 splines at the differential, and neck down to 27 Spline at...

www.rcvperformance.com

 

[woytovich]

Bumping this back... I am confused (nothing new there I guess)....

My 75 series Troopy, 1995, has factory electric lockers.

I'm rebuilding my front end (knuckles etc) and the birf/shafts are out....both the long and short front axle shafts have short splines at the diff end! I thought that the long side should have long splines. Any clarification would be appreciated.

Short side

Long side

Front diff

 

[cruisermatt]

The one side being longer is only a thing for 9.5”s

 

[woytovich]

Sweet, thank you for that information. I was worried this was another piece of previous owner shenanigans