RFB
97 FZJ80 LIFTED SC DUAL BATTERIES,37s
If so does the offset work well on setting tires (offset) out, Im looking to gain an inch outward. My rims is cracked and Id rather use rims that give me an inch, instead of using spacers.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I remember seeing someone on here with them. The offset calculators online should give you a good comparisonIf so does the offset work well on setting tires (offset) out, Im looking to gain an inch outward. My rims is cracked and Id rather use rims that give me an inch, instead of using spacers.
Adding spacers or doing this are equivalent and both will increase scrub radius. BooIf so does the offset work well on setting tires (offset) out, Im looking to gain an inch outward. My rims is cracked and Id rather use rims that give me an inch, instead of using spacers.
Posting the specs of the rims you want would be helpful to the discussion.
I’m running some 17x9” KMC wheels with -12mm of offset. Which yields the same as OEM backspace. But I gain the 1” of wheel width. No noticeable scrub issues.
1795ARY-86140G12 | 17x9.5 | 6x139.70 | -18 | 4.500 | GUNBLACK |
17x9.5
1795ARY-86140G12 17x9.5 6x139.70 -18 4.500 GUNBLACK
-18 offset
4.50 backspacing
out of all the stuff Ive done to the truck rims make my head hurt.That should net the same overall width (+2” overall) as I’m running. You’ll just have a 1/2” more wheel to the inside too on each side.
And my KMC’s are not beadlocks so no where near $450 each. I wanted to get the Hutchinson Beadlocks but couldn’t swallow the price either.
so i would still need 1 in spacers? Is that accurate? Im only swapping rims becase the ION wheels Ive used finally started to crack.That should net the same overall width (+2” overall) as I’m running. You’ll just have a 1/2” more wheel to the inside too on each side.
And my KMC’s are not beadlocks so no where near $450 each. I wanted to get the Hutchinson Beadlocks but couldn’t swallow the price either.
I have to run spacers without them I scrub the radius arms, mud grapplers are wide AFI would not run spacers on anything. The only question is if the extra 1/2" is going to contact anything on the inside? That comes down to individual wheel design and diameter. But that extra could hit a tie rod. I'm not driving my 80 today so I can't post a pick how close mine are until I get home.
Did you buy the Black Rhino Wheels? If so, what back spacing did you use and how happy are you with it? Can you post some pics please?If so does the offset work well on setting tires (offset) out, Im looking to gain an inch outward. My rims is cracked and Id rather use rims that give me an inch, instead of using spacers.
16x8 | 6x139.70 | ‑10 | 112.1 |
I would not run spacers on anything.
I ordered them last night. I got the this:
16x8 6x139.70 ‑10 112.1
3” lift. Tire dimensions are 315/75/16
Hoping I won’t have any problems.