hey just found a deal on 17x9 0 offset wheels for my lx470 i was thinking 295/70/17 wheels along with the AHC sensor lift. does anyone have 0 offset wheels on their rig? if so please post thanks.
Anyone have a 100 Series with 0 offset wheels? if so pics please (1 Viewer)
- Thread starter Rvp
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
These are 1mm offset, installed prior to my ownership.
They look great just sitting there, but they rub on every part of the fender when stuffed. I suspect someday I'll get different wheels to make it stop.
On a different note, I sideswiped a parked car the other day
and just left tire marks down the side. Didn't touch the body or sliders at all.
They look great just sitting there, but they rub on every part of the fender when stuffed. I suspect someday I'll get different wheels to make it stop.
On a different note, I sideswiped a parked car the other day
and just left tire marks down the side. Didn't touch the body or sliders at all.
- Thread starter
- #3
well ain’t she a beaut, thank you sir. i guess this shall do since they were only $400, they’ll be replaced down the road as well. nice to hear she was safeThese are 1mm offset, installed prior to my ownership.
View attachment 2463237
View attachment 2463238
They look great just sitting there, but they rub on every part of the fender when stuffed. I suspect someday I'll get different wheels to make it stop.
On a different note, I sideswiped a parked car the other day
- Thread starter
- #5
Yes everything checked out until i seen the zero 0 offset and thats when i started searching online. Thanks !
mdcoa
SILVER Star
zero offset, but a good bit skinnier . . . 6x16
Did you paint the bumpers on this? Mine are looking kind of though and am thinking through options.
If you did paint it, what did you use?
mdcoa
SILVER Star
Sure did—Krylon fusion satin black.
16x8 0 offset 295/75R16
17x8.5 zero offset Method 304 with 35x12.50 kenda klever RT
Can you share more pics please
Hi, no rub on this set up?
17x8.5 zero offset Method 304 with 35x12.50 kenda klever RT
What did you do to stop the rub?
Hey man, car looks great! How did you get the front end to not look like its pointing downwards? Rear looks normal height and front looks slightly lifted maybe? Also, any scrub with that tire wheel combo and if so, how hard is it to fix? I think this is what i'd like to do with my 100 series. Cheers!
Just keep in mind that in Australia, your maximum - legal - offset change is 25mm (ie 50mm track width). So for the hunjy, you can change from +60mm (factory) to +35mm. Not sure about SA, however the Qld scalies are brutal on this stuff.
Here's the NSW blurb, however this applies nationally.
FamilyCamper
SILVER Star
0 offset 17x8.5 methods. Had to do some trimming of the fender liner and pinch weld to fit 285/70/17 K02s fully articulated. Now on 35x11.5 and had to do a lot more pinch weld clearing and some fender mods and have crunched my fender once bc bumps stops weren't long enough. If you're staying under 35 0 offset won't cause too many issues with some pinch weld mods. That's a really good price though and could easily sell again for that.
Ahhh good info man. Thanks for that. Last thing I want is attention from the cops. I'll definitely aim to stay within those limits. Thanks for pointing that out
