- Thread starter
- #21
Yes, I installed an OME 2.5” kit and the supplied Castor correction bushings back in November.'Noise is most noticeable on deceleration from high speed. Not throttle dependent. Makes less noise on acceleration than deceleration'
Does your 80 Have a lift kit? Mine did the exact same thing your describing after I installed a 2.5 inch lift kit. What I didn't do immediately at the time of the lift kit was install the supplied caster bushings. Once the bushings were installed in the control arms the vibration and noise went away. Was anything moved or disturbed in that area?
My .02 cents
CB