Builds another cummins swap thread/build thread (2 Viewers)

[gdctaco]

I recall talking to Dustin about the fan shroud, it won't fit around the mechanical fan. The bracket is designed to move the fan over to the passenger and down slightly, so that it clears the battery box.

Use the cummins fan or Toyota? I don't have either!

 

[Mr Cimarron]

I can't see anyway for a mechanical fan to fit with the 6BT.

 

[Dirty Koala]

Is that the old or new style intake tube? I think it looks taller than mine.

 

[Dirty Koala]

Use the cummins fan or Toyota? I don't have either!

I can't see anyway for a mechanical fan to fit with the 6BT.

It's is supposed to work with the stock cummins mechanical fan and no shroud.

 

[Mr Cimarron]

It's is supposed to work with the stock cummins mechanical fan and no shroud.

What the dimensions of the fan? Not much room in there.

 

[Mr Cimarron]

Here is a side view for reference regarding intake horn. Remember I have 1" body lift.

 

[Dirty Koala]

Here is a side view for reference regarding intake horn. Remember I have 1" body lift.

View attachment 1043435

Do you know if duiser used Dustin's engine mounts, or do they fab their own. If they fab their own, the engine positioning maybe different from Dustin's.

 

[Mr Cimarron]

Do you know if duiser used Dustin's engine mounts, or do they fab their own. If they fab their own, the engine positioning maybe different from Dustin's.

They fabricated custom mounts. I'll go snap a photo of how close the engine sits against the firewall to compare to the one showing gdctaco's rear coolant inlet here posted earlier.

 

[Mr Cimarron]

Seems about the same to me.

 

[gdctaco]

Whale oil beef hooked!!!

 

[Mr Cimarron]

Whale oil beef hooked!!!

Is that Canadian for hood closes fine?

 

[Dirty Koala]

That was my interpretation

 

[gdctaco]

Soooo close

It's hard to see but it restricts the full movement of the throttle

It's also right tight against the fuel filter, might be easier to relocate the fuel filter to the firewall

 

[gdctaco]

That was my interpretation

Is that Canadian for hood closes fine?

It's Newfie, say it aloud in a newf accent

 

[Dirty Koala]

It's Newfie, say it aloud in a newf accent

haha, very clever

 

[maxamillion2345]

Power steering pump fitting to -6 jic compression fitting for those who don't want to use dustins idea

Thats the proper solution. I blew my new conversion hose so ordered fittings to convert to -6 jic as well.

 

[gdctaco]

You blew up the hose Dustins sending out?

 

[maxamillion2345]

You blew up the hose Dustins sending out?

No. I built my truck without a kit.

Point is, convertin to jic fittings ia the best way to do it.

 

[maxamillion2345]

Dont forget the hood has a curve to it.

 

[bigfj62]

How long till we see some driving videos?