AirDownGearUp SS1: Storage, Sleeper and Drawer System for 100 series

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

@Kyle Bell Thank you for providing a quick response - the 17" height is really intriguing to me as I'm having trouble finding storage bins/boxes that seem to fit under the 13" deck height of the standard SS1. I'm in the process of making some changes to my kit and thinking through what changes if I go with the SS1.
 
collk22 said:
@Kyle Bell Thank you for providing a quick response - the 17" height is really intriguing to me as I'm having trouble finding storage bins/boxes that seem to fit under the 13" deck height of the standard SS1. I'm in the process of making some changes to my kit and thinking through what changes if I go with the SS1.
Click to expand...

That was the same situation for the customer that wanted the extra height. Do you have specific bins in mind? I have some suggestions that I used for about 2 years with the standard height, but they were simple rubbermaid totes. They worked surprisingly well, but obviously were not comparable to a pelican case or anything like that.
 
Kyle Bell said:
That was the same situation for the customer that wanted the extra height. Do you have specific bins in mind? I have some suggestions that I used for about 2 years with the standard height, but they were simple rubbermaid totes. They worked surprisingly well, but obviously were not comparable to a pelican case or anything like that.
Click to expand...

I've got some plastic footlockers at the end of life that measure: 32.5 by 15.75 by 13.75 inches (length by width by height) that I'm looking to replace.

I've been looking at the Plano Sportsman Trunk, both the 1819 and 1919 versions which have the following dimensions:

37.75" long x 18.25" wide x 14" high.

www.planomolding.com

Sportsman's Trunk Large

If You Enjoy The Outdoors, You Need This To Store Your Valuable Gear. Shop For A Large Sportsman's Trunk Large Today. Save 15% On Your First Order Here.
www.planomolding.com www.planomolding.com

I'm totally open to suggestion if you can point my towards what you or others have been using as I've been having trouble locating bins that I think would work for me with an SS1.

Thanks in advance!
 
Last edited:
collk22 said:
I've got some plastic footlockers at the end of life that measure: 32.5 by 15.75 by 13.75 inches (length by width by height) that I'm looking to replace.

I've been looking at the Plano Sportsman Trunk, both the 1819 and 1919 versions which have the following dimensions:

37.75" long x 18.25" wide x 14" high.

www.planomolding.com

Sportsman's Trunk Large

If You Enjoy The Outdoors, You Need This To Store Your Valuable Gear. Shop For A Large Sportsman's Trunk Large Today. Save 15% On Your First Order Here.
www.planomolding.com www.planomolding.com

I'm totally open to suggestion if you can point my towards what you or others have been using as I've been having trouble locating bins that I think would work for me with an SS1.

Thanks in advance!
Click to expand...

So I was using the bins and cooler below with success. Basically I had all the 'kitchen' gear in one of the large totes, all of my 'camp tools' in the other, and used the small bins for various vehicle tools, parts, etc. This set up worked very well and allowed me to be flexible with camp set up, plus made swapping from camping to daily duties very simple. Here's a pic of a typical set up I would use. (any CO folks recognize where this picture was taken?)



"57089" | U.S. Plastic Corp.

www.usplastic.com www.usplastic.com

"42026" | U.S. Plastic Corp.

www.usplastic.com www.usplastic.com


Amazon.com : Coleman 48-Can Party Stacker Cooler Suitable For Tail Gating Parties, Family Reunions, Picnics : Sports & Outdoors




1976589
 
Last edited:
@Kyle Bell

What's the best way to get in touch with you off the forum? Just about ready to pull the trigger, assuming the 17" legs are an option, but would like to chat a little more.

Thanks.
 
collk22 said:
@Kyle Bell

What's the best way to get in touch with you off the forum? Just about ready to pull the trigger, assuming the 17" legs are an option, but would like to chat a little more.

Thanks.
Click to expand...
Best place for more in depth conversation is to shoot us an email at info@airdowngearup.com

Happy to clear anything up!

Kyle
 
FYI folks, slightly used SS1 up for sale. See below. This has been my personal unit for the last ~12 months or so.

forum.ih8mud.com

For Sale - Used SS1-01 Base + Sleeper Unlined

Hi Everyone, We have another down rev platform we are looking to sell. This is a partially built unlined platform and sleeper. The sleeper still needs to be assembled/installed but is new. The platform is lightly used and just slightly out of rev from our current version. Basically, just some...
forum.ih8mud.com forum.ih8mud.com
 
TomEf said:
Not half bad. Just trying to have something to sleep on by HIH9, so I think we're good
Click to expand...

Not a problem! We will be able to get something to you well ahead of HIH9. The sleeping platform is always nice for the 'expo' style events, especially with the ground always being a bit soupy/muddy for HIH.
 
Kyle Bell said:
Not a problem! We will be able to get something to you well ahead of HIH9. The sleeping platform is always nice for the 'expo' style events, especially with the ground always being a bit soupy/muddy for HIH.
Click to expand...

I'm not sure I could go back to slumming it on the ground like a chump at this point. The platform is quiet, secure and comfy!
 
suprarx7nut said:
I'm not sure I could go back to slumming it on the ground like a chump at this point. The platform is quiet, secure and comfy!
Click to expand...

And when you get visitors like this to your camp site, it's nice to not be on the ground! haha. Recent trip to Fruita CO.
2001298
 
RAMf1 said:
I think this drawer refrigerator is the perfect size to fit under the standard height platform. It is manufactured by indel B ... They make some really nice looking units... It is just under 10" tall and is 17.5" wide and 27.56" deep.
View attachment 2061712
Click to expand...

Yes! I have always thought it would be great to install the 100 Series Tailgate Storage Lid tailgate storage and free up a drawer's worth of gear for one of these!

This would really keep the set up nice and clean while maintaining the pre-deployed sleeping setup, which is so nice for rolling into camp!
 
You must log in or register to reply here.

Similar threads

highalpinecruiser
AHC system fluid leak...
Replies
13
Views
1K
highalpinecruiser
highalpinecruiser
T revorNobody
3D-Printed Center Console Storage Panel
Replies
4
Views
859
Landman2000
Landman2000
Neuner
Full Brake System Replacement
Replies
8
Views
1K
Exiled
Exiled
B
Prepping Master Cylinder/Booster Assy. for Long Term Storage
Replies
2
Views
695
badlander
B

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom