Question. I’m upgrading my old halogen halogen driving lights with new LED lights Hella Value fit 500 - worst name ever, but impressed with build quality so far. .
The new Hellas have a 3 position switch. Driving lights on, DTR lights on and Off.
I currently have 2 SOF aux harnesses. One in each configuration. (High beam + Driving Lights on/off and low beams on, fogs on).
Melting my brain on how to make this new set up compatible with SOF harness.
The desired mode is for LED drivers to turn on with high beams and DTRs with low beams.
I know I’ll have to mod new harness so each set of lights get power.
But do I jump off of the existing SOF aux relay, 87 to red wire on new relays. I assume I will need to cut the jumper on the new relay to power DL and DTR separately. Switch will need a mod too.
Thanks team.
The new Hellas have a 3 position switch. Driving lights on, DTR lights on and Off.
I currently have 2 SOF aux harnesses. One in each configuration. (High beam + Driving Lights on/off and low beams on, fogs on).
Melting my brain on how to make this new set up compatible with SOF harness.
The desired mode is for LED drivers to turn on with high beams and DTRs with low beams.
I know I’ll have to mod new harness so each set of lights get power.
But do I jump off of the existing SOF aux relay, 87 to red wire on new relays. I assume I will need to cut the jumper on the new relay to power DL and DTR separately. Switch will need a mod too.
Thanks team.