Started her up and this happens. Seems all the backlights are out which is concerning. Anyone else have this happen??
A least the D works!!! (1 Viewer)
- Thread starter AR2000LX470
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The switch only works when the vehicle is right side up....
- Thread starter
- #3
Right side up and still not working.
My d light wasn't working when I got mine. I went on a bumpy dirt road and all working now. On the other hand The rest of your panel cluster out seems like an unusual problem.
Forgive my poor attempt at humor, I have no advice- just trying to be funny..
At least it's easy to get the instrument cluster out:
- Thread starter
- #9
It seems to be working. The needles dim and brighten but nothing else.
- Thread starter
- #11
Fuses all good. I pulled the cluster and reinstalled with no changes. I guess I'll pull it and it off to a cluster repair shop.
Does your radio still turn on? i had a similar issue (kind of), my dash and stereo went out at the same time and it ended up being a fried ECU due to water getting behind the glove box 
.
.
- Thread starter
- #13
Radio works. All warning lights, turn signals, gear indicator lights as well as the speedo and tach needles light up. It's just the backlight for the gauges for lack of a better term are out. Turning on headlights makes no difference as does the dimmer switch, which is only dimming the needles. Thanks for the replies, I'll send the cluster off and report back.
