87 Cruiser LS Swap...Need Help (1 Viewer)

[YohanFJ62]

Hello! I was hoping someone can give me some insight or point me to the right direction.

1987 Land Cruiser, had a 2F engine with H44F transmission.
Conversion:
-LM7 Vin T from a 2000 Tahoe (Originally automatic transmission) with 5.3L LS crank pattern
-H55F Transmission

I have purchased these kits from MARKS4WD:
-Bellhousing adaptor
Bell Housing Adaptor Kit - LS Series V8 to LandCruiser FJ Petrol (Manual) | Marks 4WD - https://www.marks4wd.com/mfk560g3.html
-Engine mount kit
LS V8 Engine Mount kit - Toyota LandCruiser 60 series | Marks 4WD - https://www.marks4wd.com/mfk40430.html
-Clutch kit
Clutch Kit (Organic Plate) - Chev V8 Petrol 12" - 10 Tooth Spline | Marks 4WD - https://www.marks4wd.com/mck110.html

My question is how do I mate up the clutch to the clutch pedal with the new adaptor?

Thanks for any help

 

[cruisermatt]

Stock FJ60 slave cyl in the stock location, FJ60 clutch fork

Did you read the instructions?

 

[YohanFJ62]

Hey Matt, the kit didn't come with paper instructions but I found the instructions online on their website. Thanks man I'll get my hands on the truck and let you know if anything else comes up

 

[cns]

Hello! I was hoping someone can give me some insight or point me to the right direction.

1987 Land Cruiser, had a 2F engine with H44F transmission.
Conversion:
-LM7 Vin T from a 2000 Tahoe (Originally automatic transmission) with 5.3L LS crank pattern
-H55F Transmission

I have purchased these kits from MARKS4WD:
-Bellhousing adaptor
Bell Housing Adaptor Kit - LS Series V8 to LandCruiser FJ Petrol (Manual) | Marks 4WD - https://www.marks4wd.com/mfk560g3.html
-Engine mount kit
LS V8 Engine Mount kit - Toyota LandCruiser 60 series | Marks 4WD - https://www.marks4wd.com/mfk40430.html
-Clutch kit
Clutch Kit (Organic Plate) - Chev V8 Petrol 12" - 10 Tooth Spline | Marks 4WD - https://www.marks4wd.com/mck110.html

My question is how do I mate up the clutch to the clutch pedal with the new adaptor?

Thanks for any help

So how did it turn out? Is the pressure plate in the clutch something you can pick up in the US?