Is Sean responding to PMs? I sent one a while back and no response.
Yes. I think he is a one man band. You can also email hustonfabrication@gmail.com
Got mine installed last weekend.
80 series swing out tire carrier bumper
- Thread starter sean
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yes. I think he is a one man band. You can also email hustonfabrication@gmail.com
Got mine installed last weekend.
Thanks Sean 
( $ sent )
Woohoo! Got my tracking information this morning! Im like a kid tracking Santa Clause! Looking forward to receiving the new bumper! 
cool! bumper was delivered to my friends shop, and he delivered it this morning to my house! he, being an 80 owner too- was just as excited as me to see the fabrication that hid in the very well packed box. all I can say is, "Wow! that is one well built and well thought out bumper packed in a box that looked like it was built by a professional carpenter."
I spent the evening removing the old stuff from the cruiser, and going to spend the morning installing the new work of art bumper! will post photos!
I spent the evening removing the old stuff from the cruiser, and going to spend the morning installing the new work of art bumper! will post photos!
Rear bumper purchase
Want to purchase one of those bumpers. I live in Murrieta, what be the deal on one? Can drive Dwn to pick it up. 1994 LC
Want to purchase one of those bumpers. I live in Murrieta, what be the deal on one? Can drive Dwn to pick it up. 1994 LC
another use
Ive had my Sean bumper a couple years now but just bought a new Yeti Tundra 35 and I got to looking and yep it fits perfect.
Thanks again Sean!
Ive had my Sean bumper a couple years now but just bought a new Yeti Tundra 35 and I got to looking and yep it fits perfect.
Thanks again Sean!
If you drive there, he does the install for free while you wait is what I heard.
^ yep. But it takes a few hours, so it's easier to just drop it off and do something else for a while.
My bumper is HERE! Thanks Sean! Thing thing is a beauty. Mine will be bare steel. Gonna polish it up and clear coat when I get the chance. Still have a few pieces to button up but it's mostly done. Time to order a new rim and get a spare tire!
PICS!
The monster crate you get from Sean, picked up at a local freight terminal
Did this all by myself so it took me a few hours. I'm in love
PICS!
The monster crate you get from Sean, picked up at a local freight terminal
Did this all by myself so it took me a few hours. I'm in love
Jose, where did you source your rear turns from?
The taillights? Those are from ebay seller 'neondials'...
Thats what I thought but wanted to be sure mine looked the same as yours do, love that look.
anybody come up with any ideas for locking jerry cans down to basket?
I have a cable lock going through all handles of the Jerry cans. With a longer cable you could go through the mounts on the basket as well as the handles.
jtwopark
live, eat, sleep Land Cruiser!!!
once you put this bumper on, can you put everything back to stock? just wondering after going to the dealer and received an estimate for over $6000! for all the repairs that need to be made.
if you cut the rear cross member close enough- I am sure it could be welded back into place if you decided to return it to stock form... but, why? Seans bumper rocks!
- Thread starter
- #378
Thanks Thad I am glad too see you are happy with the bumper. And have been and am trying to figure out a way to make a holddown and locking system for the jerry cans and will post some pics when I finally get it figured out.
Cutting out the crossmember is pretty permanent alteration to the truck, and can not be just bolted back in with ease. The crossmember could be welded back in possibly if it was cut out extremely clean, but if going back to stock i think it would be a easier to have a custom crossmember built with some tabs that the stock system can bolt into. I do not recommend my bumper for your truck if you think you might want to put the stock stuff back on some day without a major headache.
Cutting out the crossmember is pretty permanent alteration to the truck, and can not be just bolted back in with ease. The crossmember could be welded back in possibly if it was cut out extremely clean, but if going back to stock i think it would be a easier to have a custom crossmember built with some tabs that the stock system can bolt into. I do not recommend my bumper for your truck if you think you might want to put the stock stuff back on some day without a major headache.
Last edited:
sean, is there a waitlist at the moment for one of your bumpers?
