Just installed my new disconnect brackets, super easy install.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I just crawled under my 97LC and found that one of the sway bar welds is broken....as you mentioned. I’ve disconnected everything and the bracket that broke off “tore out” on the back side. Wondering how best to repair? I thought it was odd that both sides have a perfect 1/2 hole drill thru them, bracket and axle mount... but no bolt. Does a new bracket need to be welded on? Or can I bolt it on? Or both? I guess I’ll fabricate the bracket.... doubt anyone sells that part. Any advise welcomed!Usually we disconnect the front sway bar. l have seen the front sway bar mounts on the axle break at the weld when wheeling. You will get a lot better ride off road with the front sway bar disconnected. Kind of like airing down your tires.
I upgraded mine to 1/4" and bolted them in place.I just crawled under my 97LC and found that one of the sway bar welds is broken....as you mentioned. I’ve disconnected everything and the bracket that broke off “tore out” on the back side. Wondering how best to repair? I thought it was odd that both sides have a perfect 1/2 hole drill thru them, bracket and axle mount... but no bolt. Does a new bracket need to be welded on? Or can I bolt it on? Or both? I guess I’ll fabricate the bracket.... doubt anyone sells that part. Any advise welcomed!
Yes normally no notification because we ship daily but we are currently waiting on Zinc plating,Hi Phil,
Are these still being made? i purchased a set through your website a couple weeks ago but have not gotten any confirmation or shipping notices.
Are these still available for purchase? Website link doesn’t work.
Found it. Unfortunately I have a 92’ Hdj81. Any plans on making them for the 91-92?Yes
Website link in my signature of every post. If you are on your phone you will need to turn it sideways to see members' signatures.
LCP
Battery Bracket Upgrade Jack Adapters Mud Flap Eliminators Rear Heater Delete Hose Severe Duty Rear Sway Bar Links Shifter Extension Sway Bar Disconnects T-Shirts Window Modssites.google.com
Without a pic I could not be sureWould this disconnect interfere with Timbren bump stops? Attaches to the same location?
Would this disconnect interfere with Timbren bump stops? Attaches to the same location?
ThanksLCP
Battery Bracket Upgrade Jack Adapters Mud Flap Eliminators Rear Heater Delete Hose Severe Duty Rear Sway Bar Links Shifter Extension Sway Bar Disconnects T-Shirts Window Modssites.google.com
In Stock
Are you running slinky springs?On my 80 I'm running medium spring in the front and heavy in the rear and I don't run sway bars at all its plenty stiff hardly any sway at all I even pull a camper and can't tell I don't have sway bars