70 series MWB storage solutions - Post some photos! (1 Viewer)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Not a middy but SWB, this was the original layout, sizing it around some commonly available plastic bins made it an easy build & it worked great. I was lucky to have some waterproof HDF panels to build it with, not sure how easy that stuff is to find now.
Recovery gear storage & a cheap thermoelectric cooler built into the front.
Then the 2017 rebuild when I installed a proper fridge:
Deep cycle AGM battery sits in where the old cooler was:
Cheers
Clint
Recovery gear storage & a cheap thermoelectric cooler built into the front.
Then the 2017 rebuild when I installed a proper fridge:
Deep cycle AGM battery sits in where the old cooler was:
Cheers
Clint
G'Day Fella's,
Here is the "Battle Cruiser" (BJ73), in a Deer hunting camp, in the Victorian high country (of Australia).
I have also removed the rear passenger seat, to reduce weight and increase room for gear.
Avagreatweekendeh!
Homer
Here is the "Battle Cruiser" (BJ73), in a Deer hunting camp, in the Victorian high country (of Australia).
I have also removed the rear passenger seat, to reduce weight and increase room for gear.
Avagreatweekendeh!
Homer
jblueridge
SILVER Star
Early version 1, 2008:
front compartment for (2) 6" drivers and a 10" sub. Second compartment a dedicated 12V gel cell and power distribution. Rear drawer.
Version 2, 2019/2020 - still not finished, but close... :
Pull out Drifta kitchen, floor level fridge on slide
lots of space in the side box
up front, one top loader, one front loader. I messed these up and can't put the seats back from full upright
They'll be modded then the lids put on.
front compartment for (2) 6" drivers and a 10" sub. Second compartment a dedicated 12V gel cell and power distribution. Rear drawer.
Version 2, 2019/2020 - still not finished, but close... :
Pull out Drifta kitchen, floor level fridge on slide
lots of space in the side box
up front, one top loader, one front loader. I messed these up and can't put the seats back from full upright
They'll be modded then the lids put on.
Storage/bed system for LWB without rear seats
1988 BJ74. The box is a Weatherguard "PACK RAT" model 308-3 48Lx39.75Wx9.5H. They now offer one that's 4 inches taller and I would have opted for that if it existed when I got this one. 338-5 | Pull Out Storage | WEATHER GUARD
It's heavy, really heavy, but damn tough. And, it fits the truck floor dimensions like it was custom-built. Not cheap, not custom, but very acceptable in my view.
Note the drawer handle was added by myself as the supplied handle would have interfered with the rear doors closing.
It's heavy, really heavy, but damn tough. And, it fits the truck floor dimensions like it was custom-built. Not cheap, not custom, but very acceptable in my view.
Note the drawer handle was added by myself as the supplied handle would have interfered with the rear doors closing.
- Thread starter
- #12
@cruiserdan Love the setup mate! Where did you get floor edging from from?
