60 series Diffs (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

if it is the axle your talking about then yes - 60's have a longer "long" side...

Some people just re-weld the spring purch on the long side into the right place on a 40 - and then one wheel sticks out further than the other....

not my cup of tea...

diff centers are effectively the same
 
Axle housings are almost 3 in ...but front to rear there is about 2'in I of difference in the same series ... So a rear 60'and front 40'are a 1/2 in or so off from each other;)
 

Users who are viewing this thread

Back
Top Bottom