Wanted 54mm hub socket (1 Viewer)

[jeffro109]

Location

United States

---FOUND ONE---


Would prefer one with a 1/2 inch drive so I don't have to get a 3/4 to 1/2 adapter.

Thanks

 

[Splangy]

Go to your local Tractor Supply Store (or online) and grab a 2 1/8" socket and 1/2" to 3/4" adaptor. It'll cost you less than $15 for the two. The 2 1/8" socket is the same size as a 54mm socket (within .0009")

Would prefer one with a 1/2 inch drive so I don't have to get a 3/4 to 1/2 adapter.

Thanks

 

[jeffro109]

Thanks, I never think of Tractor Supply for some reason.

I was in Napa yesterday looking for the 2 1/8, but no luck. They had smaller and larger, but could not get a 2 1/8 for some reason.

 

[orangefj45]

i have the 54mm sockets in stock at all times along with anything esle you might need to rebuild your knuckles.

hth

georg @ valley hybrids

 

[jeffro109]

so, Tractor Supply came through, thanks for the tip.


Georg--already got the seals, etc to go in and do a bearing repack, but thanks. One year I will have to dive all the way in to the whole rebuild, but I hope not this year.

 

[orangefj45]

cool!

 

[brew8]

"Thanks, I never think of Tractor Supply for some reason."

Not me farms store first every time, bolts by the pound, welding supplys, paint, fluids in bulk, tools, winter gear, chains, all cheaper and better..