4link 5.0 fj40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

had the hole body media blasted. I lizardskin both side of the floor. ready to go to paint next day or so. Roll cage is out to powder coat frame going next
photo.webp
 
got my roll cage is back from powder coater. body made it to the painter and the frame made its way to the powder coater . its nice having room in the garage hope to have it all back next week. order more little parts. painted motor and tranny and new freeze plug and resealed motor would like some new valve covers and egr delete kit. but motor is ready to go back in when the frame gets back. a lot of little thing to work on so i will plug away
photo.webp
 
going to get my frame today. 2 1/2 hr of work to get the windshield in frame. going to get the motor tranny and t case in to day and whatever elsa i gan do
photo.webp
 
Been enjoying this build. Hope you get some time this winter to keep going.
 
thanks for looking and i have had some time to work in it. hope to drive it next week. here are some pics
IMG_2761.webp
IMG_2769.webp
IMG_2791.webp
 
i got to drive it to day :beer::beer::beer: going to put some miles on it tomorrow and get it dirty :steer::steer:
photo.webp
 
i have put about 150 miles on it does real good. hope to find some place near by to wheel it tomorrow
photo.webp
 
got rear shock in .run out of weld on tabs for gas tank mount. and a little more time and will have my oem inner fender welded to the metal tech then to the other side

Good to see this rolling, cool build!

Couple of questions for ya.
Did you ever change the rear pinion angle?
Brace your lower link, frame side mounts?

The lower rear shock mounts look like they are gonna bind-up when you flex this thing.
I realize this photo and post are over a year old, so maybe things have changed...
IMGP1089.webp
 
yes i got my pinion fixed. and i did brace the lower links. did not move the shock they are working good thanks for looking
photo.webp
 

Users who are viewing this thread

Back
Top Bottom