40th Family Wheeler (6 Viewers)

[NorCalFJ100]

That looks like a great time! That first picture looks wild!

 

[Pascoscout]

That's Cliffhanger, on the signature obstacle. It's not as bad as it looks, there's at least a couple of feet between you and the edge of the cliff. Going down was slow, big drops, but not bad. Up was harder, have to climb those same drops and you can only see blue sky, and your brain knows that drop off is just a few feet away so it gets in your head. Have to trust your spotter.

 

[Pascoscout]

So I guess I did break some stuff in Moab. Driver side front sway bar mount broke off. Didn't take anything with it. Need HD mounts from Land Cruiser Products installed. One thing of note is even though the kit can be bolted in (LCP recommends welding) but if you have the Delta radius arms the hardware to bolt them on is too big (nut is too tall and bolt is too long). I machined one nut and bolt down to hold the bracket in place for welding, then removed when I was done. I highly recommend unbolting your ABS lines and sensor and moving them away from the welding area. The lines are so close you'd probably melt one if you don't. I also wrapped my break lines and shock shafts in aluminum foil to help shield the heat and spatter.