4" and 33x12.5s ??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 13, 2004
Threads
937
Messages
6,020
Location
Normandy Park Wa. ........now in San Diego Ca.
Anyone running a 4" lift and 33x 12.5s.....Pics

trying to run 33x12.5s (already have) without cutting my rear fenders...
 
i have a 3" lift and run 33x12.50s not exactly what you are looking for but here are some pics of the clearance i have, i def need to do something...
HPIM1034.webp
 
attachment.php


I'm running 2.5" lift springs, and 3" over stock shackles on the rear, which give 1.5" at the axle. So that's 2.5" plus 1.5" equals 4" of lift.

The tires as 12.50 x 33 x 15.

The wheelwells are uncut. The lift is adequate for the street and mild offroad use. It is not adequate for tire chains nor rock crawling.

I may go to 4" lift springs and then run long shackles, perhaps 2" over stock.

The FJ40 sits at a slight rake because the front shackles are stock and the top is off. However, the rake is not as bad as this photo seems to indicate.
 
4" skyjacker lift and 33x12.50 procomp tires/wheels. No rear rubber bump stops and it rubs the back corner of the wheel well of my aquala tub, but not enough for me to cut anything. I'm going to add the factory rubber bump stops and see if that helps any.
iphone 117.webp
iphone 116 no plate.webp
 
4" Hell Creek lift with 1.75" longer shackles. 33 x 12.50 BFG Mud Terrains.

:cheers:
TSF wheeling 5-11-090005.webp
2nd camping trip0005.webp
camping 7-080005.webp
 

Users who are viewing this thread

Back
Top Bottom