3D Printing Parts for the 80 (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I love the possibilities of 3d printing.

Anyone got any pointers on free or cheap 3d modelling software suitable for this kind of project?
Or pointers to an idiots guide to 3d printing?

I've played with a couple of programs. Done some 3d modelling to sort out design issues on construction projects, but as a 3d modeller, I make a pretty good construction foreman 😆 and haven't been able to justify spending money on software
 
I am not the correct person to respond really, but I've done a few in Sketchup, learning Blender. but there is FreeCad, LibreCad, OpenCad and HeeksCad. I have them all installed and haven't had time to do much learning wise. I would imagine you could pick them up fairly quickly where I am starting from nothing.
 
mudgudgeon said:
I love the possibilities of 3d printing.

Anyone got any pointers on free or cheap 3d modelling software suitable for this kind of project?
Or pointers to an idiots guide to 3d printing?

I've played with a couple of programs. Done some 3d modelling to sort out design issues on construction projects, but as a 3d modeller, I make a pretty good construction foreman 😆 and haven't been able to justify spending money on software
Click to expand...

Autodesk Fusion 360 is free to the hobbyist and Is the benchmark of 3D modeling IMHO.
 
clx16 said:
I am not the correct person to respond really, but I've done a few in Sketchup, learning Blender. but there is FreeCad, LibreCad, OpenCad and HeeksCad. I have them all installed and haven't had time to do much learning wise. I would imagine you could pick them up fairly quickly where I am starting from nothing.
Click to expand...

I've used SketchUp a little bit, but not for ages. I think I found it ok.
From memory I paid a small subscription fee for more functionality. Can't remember though
 
Definitely encourage you to buy a 3D printer and have a play - I've found endless uses for mine.

I originally bought it for my racing sim motion platform project - and to put it mildly the wife was very dubious - but I've used the crap out of it for all sorts of things. Amazing world we live in where you can have a need, model, prototype and build in your basement.


58968187718__70B17294-2027-4ADE-948B-5C1E021FCF8C.JPG
 
I started with SketchUp, and I am cheap... People don't look at other tools when they are happy with the tools they have. Learning blender hasn't been easy but certainly has more features and less glitches. I didn't know I could use Fusion for free so I will have to look at that.
 
I would love to a rear ashtray replacement that incorporates a single USB and a seat heater switch. I also wouldn't mind a 3rd row ashtray replacement that had a 120v outlet.
 
Those are not hard, you can pull down the attached sketches and modify them pretty easy. The rear one can be purchased in just about any configuration if you don't want to print just look at the bolt ripper build threat for those ideas.

I am going to design one to replace my 3rd row ashtray when i get time
 
GA682 said:
I would love to a rear ashtray replacement that incorporates a single USB and a seat heater switch. I also wouldn't mind a 3rd row ashtray replacement that had a 120v outlet.
Click to expand...
clx16 said:
Those are not hard, you can pull down the attached sketches and modify them pretty easy. The rear one can be purchased in just about any configuration if you don't want to print just look at the bolt ripper build threat for those ideas.

I am going to design one to replace my 3rd row ashtray when i get time
Click to expand...

both of these are already available?

Delta Vehicle Systems

Off-road and 4x4 performance equipment designed and manufactured in Boise, Idaho. Bumpers, lift kits, storage solutions and more premier overland equipment for your off-road vehicle.
www.deltavs.com www.deltavs.com

and

www.etsy.com

Ash Tray Replacement Plate Landcruiser Fj80 Fzj80 LX450 - Etsy

This Car Accessories item by SolveFunction has 153 favorites from Etsy shoppers. Ships from San Mateo, CA. Listed on Aug 21, 2024
www.etsy.com www.etsy.com
 
thanks @Delta VS

@GA682 sounds like you want to use the spot in the rear doors for the rear seat heater switches. Delta can probably adjust his model to fit your switches. If you want the different switch in the spot I made a panel for let me know and I can make some changes for you.
 
Has anyone printed the fender flare clips? My driver side rear panel fender flare is missing 2 clips. I have a 3-D printer and can print from a file. Thanks
 
UncleLDP said:
Has anyone printed the fender flare clips? My driver side rear panel fender flare is missing 2 clips. I have a 3-D printer and can print from a file. Thanks
Click to expand...
The replaceable ones? Those are still available from Toyota.

edit: not saying that’s a reason to not print them, just that probably not going to be much effort in printing them until no longer available?
 
Delta VS said:
The replaceable ones? Those are still available from Toyota.

edit: not saying that’s a reason to not print them, just that probably not going to be much effort in printing them until no longer available?
Click to expand...
No, not the replaceable ones, the plastic part on the flare itself. I know lots of people repair them with epoxy etc. but mine are not repairable. Completely sheared off. I have clips and welting I just need to replace the (receptacle ) for the clip. Hope that makes sense.Thanks
 
UncleLDP said:
No, not the replaceable ones, the plastic part on the flare itself. I know lots of people repair them with epoxy etc. but mine are not repairable. Completely sheared off. I have clips and welting I just need to replace the (receptacle ) for the clip. Hope that makes sense.Thanks
Click to expand...
Gotcha, that makes a lot more sense! They are different for 91-91, 93-94, and 95-97, so keep that in mind if/when you find anything.
 
You must log in or register to reply here.

Similar threads

LJE
Lumberjack Engineering: 3D printed (and beyond!) solutions for the 80 Series Platform
Replies
0
Views
151
LJE
LJE
Herrett
3D printed sunroof switch cover
Replies
0
Views
520
Herrett
Herrett
Herrett
3D printed sunroof switch cover installed
Replies
5
Views
890
Outsane
Outsane
G
Wouxon GMRS Radio Install - 3D Printed Solution
Replies
6
Views
1K
Outsane
Outsane

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom