- Thread starter
- #21
Wow that look nice. Can You shot a photo of your shift knob ? Is this scion trd one PTR51-00110 ? Its nice because its shorter than stock one.. thinking about same one.
2003 gx470 recovery (1 Viewer)
- Thread starter Timonek
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
Hi Lexus maniacs
not much happen with my gx due to no time... but Saturday is close meantime im trying to find half a hour everyday to move it on. This week i redo armrests with new leather covers, to my surprise they look awsome, better than from factory because they are thicker. You simply put leather over old leather.
I bought and painted front calipers from gx460. just waiting for rotors from EBC with green stuff pads. For rears just new calipers duralast gold brakepads and centric rotors. waiting for sunny warm day to get job done. I wont be surprised if that take 2 or 3 days, always something pop up , rusted lines or something else , hopefully not but i know how it is with old cars anyway since brakes and wheels will be of i will clean frame , get rid of rust , get some rust disolver and repaint everything and deep bath in wax inside frame just in case...
not much happen with my gx due to no time... but Saturday is close meantime im trying to find half a hour everyday to move it on. This week i redo armrests with new leather covers, to my surprise they look awsome, better than from factory because they are thicker. You simply put leather over old leather.I bought and painted front calipers from gx460. just waiting for rotors from EBC with green stuff pads. For rears just new calipers duralast gold brakepads and centric rotors. waiting for sunny warm day to get job done. I wont be surprised if that take 2 or 3 days, always something pop up , rusted lines or something else , hopefully not but i know how it is with old cars
anyway since brakes and wheels will be of i will clean frame , get rid of rust , get some rust disolver and repaint everything and deep bath in wax inside frame just in case...
- Thread starter
- #23
G2USA epoxy paint, blue, 2 coats and third just on front half. Paint cover mega mega good , I have used just half of can. last photos are after 20h from painting
- Thread starter
- #24
also got that roof rack cover which is missing in my case...
- Thread starter
- #25
i dont have photos of installed armrests , was late but i get them tomorrow, probably lot of them will be interested too
- Thread starter
- #27
Thanks for info
Safety first for me especialy my wife will drive it too
nothing will be worst than bosch brake pads !- Thread starter
- #29
another saturday another work.
whats done today :
strut for rear door
new spark plugs
fresh synthetic 5w30 supertech with mobil1 filter. Will see how it works. I always was using royal purple hps , walmart oil has good reviews, and beats much more expensive oils in tests.
since front engine skid plate was off i did some cleaning of front frame support, suspension etc, i have used rust converter and this product : Amazon product ASIN B003CT49AS
time for wheels brakes and timing belt.
whats done today :
strut for rear door
new spark plugs
fresh synthetic 5w30 supertech with mobil1 filter. Will see how it works. I always was using royal purple hps , walmart oil has good reviews, and beats much more expensive oils in tests.
since front engine skid plate was off i did some cleaning of front frame support, suspension etc, i have used rust converter and this product : Amazon product ASIN B003CT49AS
time for wheels brakes and timing belt.
- Thread starter
- #30
few more
- Thread starter
- #31
few more
- Thread starter
- #32
:]
wow kudos to you... you're really getting after it!
you seem pretty well versed in interior cleaning... what products do you use?
you seem pretty well versed in interior cleaning... what products do you use?
- Thread starter
- #34
hi thx. i didnt use anything special for now... just superclean all purpose cleaner :
purple power does same job but its 2x 3x more expensive.
Once car will be ready i still have to do some dressings to plastics and leather. not yet
everyday duties doesnt leave much time for gx but little by little Im working on wheels. Two are painted.
aluminium primer ( rustoleum )
base paint ( rustoleum graphite wheel paint )
most important - good clear coat , in my case i used spraymax k2 clear glamour epoxy paint once activated its good just for 48hours, totally worth to spend 20$ per can.
timing belt kit is here, contitech serpentine belt, new thermostat gaskets etc
these weekend i will probably work on brakes if weather will be fine
getting there, slowly but getting there ...
looks like rear shocks seen better days so decided to replace them too, i dont want to jack car again , take wheels off etc. everything at one shot. do it right. thats it.
I didnt pay much for car it self plus all work is my work so I can spend little more on parts whoch is big savings.
few shots of first wheel, spare one so im not worried that much , its more like school, second one came out much better.
SuperClean Tough Task Cleaner-Degreaser, 1 gal - Walmart.com
Free 2-day shipping on qualified orders over $35. Buy SuperClean Tough Task Cleaner-Degreaser, 1 gal at Walmart.com
www.walmart.com
purple power does same job but its 2x 3x more expensive.
Once car will be ready i still have to do some dressings to plastics and leather. not yet
everyday duties doesnt leave much time for gx but little by little Im working on wheels. Two are painted.
aluminium primer ( rustoleum )
base paint ( rustoleum graphite wheel paint )
most important - good clear coat , in my case i used spraymax k2 clear glamour epoxy paint once activated its good just for 48hours, totally worth to spend 20$ per can.
timing belt kit is here, contitech serpentine belt, new thermostat gaskets etc
these weekend i will probably work on brakes if weather will be fine
getting there, slowly but getting there ...
looks like rear shocks seen better days so decided to replace them too, i dont want to jack car again , take wheels off etc. everything at one shot. do it right. thats it.
I didnt pay much for car it self plus all work is my work so I can spend little more on parts whoch is big savings.
few shots of first wheel, spare one so im not worried that much , its more like school, second one came out much better.
- Thread starter
- #35
it has slow leak so i wasnt worried for air valve it will be replaced anyway.
- Thread starter
- #36
still have to paint hub caps, but thats for last. I know its not done perfect but every other one will be done better btw these wheels need spacers for sure... now i know i should spend more time on sanding, second one came out much better i will post soon photos of all four on car :] cheers
btw these wheels need spacers for sure... now i know i should spend more time on sanding, second one came out much better i will post soon photos of all four on car :] cheers
Wow! Good deal fixing the problem and your cleaning is definitely more in depth than mine. Congratulations on the new ride.
Welcome fellow New Jersian! Burlington county here.
Welcome fellow New Jersian! Burlington county here.
I was surprised how much peeling my wheels had but I don’t care since half the time they will be dirty anyway.
- Thread starter
- #39
thanks GX460fan i know i know its obsession to keep everything clean tools cars house I like detailing im not pro but just feel better my self when everything is in good order. Most of people will say im sick and wasting time. For me its ethic of work and respect to my self my money and my work.
uhhh what a long sunny saturday ! i started with undercoating half of truck is almost done then i exchange old rear swaybar links ,
new centric rotors, duralast gold pads and new calipers ( callahan) Im so surprised how simple is to swap those brakes. seriously it can be done in 30mins if You have impact gun and good jack. So this is done, tomorrow I should receive rear shocks ( i will stick with original air setup since it works great and i will probably be offroad maybe few times at summer since im new to it... along with addiction it always can be swaped to something more serious. For now i want to enjoy quality ride and get some experience with that kind of truck. I never had real SUV truck so sorry Guys I know You will tell me get rid of side boards get real man suspension but not for now it would be waste of money to do it just to have it.
EBC set for front was backordered i was waitinf since 3weeks for delivery and it was delayed to middle march i cant wait that long so i canceled it and ordered centrics rotors and akebono pads right away. Just got them today, thanks God for time change ! finaly can work on gx little longer after work before its get dark. Wish to have nice big garage. but it is what it is Im moving forward. Next saturday my neighbour will do timing belt. This is only thing i dont know how to
enjoy few shots from yesterday !
I like detailing im not pro but just feel better my self when everything is in good order. Most of people will say im sick and wasting time. For me its ethic of work and respect to my self my money and my work. uhhh what a long sunny saturday ! i started with undercoating half of truck is almost done then i exchange old rear swaybar links ,
new centric rotors, duralast gold pads and new calipers ( callahan) Im so surprised how simple is to swap those brakes. seriously it can be done in 30mins if You have impact gun and good jack. So this is done, tomorrow I should receive rear shocks ( i will stick with original air setup since it works great and i will probably be offroad maybe few times at summer since im new to it... along with addiction it always can be swaped to something more serious. For now i want to enjoy quality ride and get some experience with that kind of truck. I never had real SUV truck so sorry Guys I know You will tell me get rid of side boards get real man suspension but not for now it would be waste of money to do it just to have it.
EBC set for front was backordered i was waitinf since 3weeks for delivery and it was delayed to middle march i cant wait that long so i canceled it and ordered centrics rotors and akebono pads right away. Just got them today, thanks God for time change ! finaly can work on gx little longer after work before its get dark. Wish to have nice big garage. but it is what it is Im moving forward. Next saturday my neighbour will do timing belt. This is only thing i dont know how to
enjoy few shots from yesterday !
- Thread starter
- #40
:]
