- Year
- 2000
- Vehicle Model
- 4Runner
- Location
- United States
- Mileage
- 250000
- Color
- rgb(175, 31, 31)
Had this truck in our family the last 6 years or so. I just rebuilt the original long block and put the motor back in in early Dec. runs great but have to figure out why I’m getting a high idle. Was not an issue prior to the rebuild.
this is a very clean truck. Had some frame surface rust with flaking around a few welds so I power washed, treated with OSPHO, and applied POR15 to the areas. I’ve gone around with a pick and hammer and there’s no weak spots. The rockers had some small rust bubbles due to weep holes being clogged. The sunroof drains in this area. I cut out the spots and welded in new 16G metal. Will paint the rockers in February. I’m putting this out there to gauge interest as I’m not deeply involved with the Gen 3 trucks (heavy focus on cruisers. Truck is at my place in TX and I’ve been in CO since late December. Glad to bring it to CO as I travel back and forth quite a bit. Also, don’t have any good pics on my phone but will post some better ones when I get back in early Feb. feel free to ask any questions as I’ve probably left a lot out. I have some research to do but thinking this will be in the $8-10 range. Thanks. Jimmy
this is a very clean truck. Had some frame surface rust with flaking around a few welds so I power washed, treated with OSPHO, and applied POR15 to the areas. I’ve gone around with a pick and hammer and there’s no weak spots. The rockers had some small rust bubbles due to weep holes being clogged. The sunroof drains in this area. I cut out the spots and welded in new 16G metal. Will paint the rockers in February. I’m putting this out there to gauge interest as I’m not deeply involved with the Gen 3 trucks (heavy focus on cruisers. Truck is at my place in TX and I’ve been in CO since late December. Glad to bring it to CO as I travel back and forth quite a bit. Also, don’t have any good pics on my phone but will post some better ones when I get back in early Feb. feel free to ask any questions as I’ve probably left a lot out. I have some research to do but thinking this will be in the $8-10 range. Thanks. Jimmy