Ugly Dwarf
SILVER Star
- Location
- United States
I'm cleaning out some spare parts that I've been hoarding in the side yard for too long and will never use.
OEM Front Bumper and Brackets. Two holes drilled by PO for fog lights which were discarded long ago. Dirty but good condition. $60
OEM / Stock Location Spare Tire Carrier and winch. This was not installed when I got the truck, so I have not tested. Looks to my untrained eye to be intact. $15
Valley Industries (brand) Rear Trailer Hitch. I installed / used this a few times when I first got my 80 series, but have since fabricated a high clearance one that passes through the rear cross member and ties into the frame rails. $30
Con Ferr roof rack - This is not 80 series specific and is listed elsewhere here on Mud, but I also have a medium length (66" x 60") Conn Fer roof rack. It has no floor (other than the three cross bars) and is dirty with surface rust, but looks to be straight and undamaged. It comes with six (6) mounts. I have put too much time and effort into my existing rack to start over with this one and it's time to let it go. I can include some reproduction Conn Fer stickers I got from SMG a while back. This is an excellent candidate to be blasted and powder coated, with a new wood or mesh floor for a classic retro look. $275
High Lift Bar - 48" - This is the BAR ONLY... With a bit of lift and 315's, I wanted a little more lifting ability and moved to a 60" bar. This has been sitting (you guessed it) in my side yard for a year now and it's time to go away. Hate to toss it. Let's set a price of $7 or a six pack of decent IPA, Brown, or Amber ale.
None of these items are good candidates for shipping due to size and weight. All are located in Concord, CA. I tried to price these items at or below what others are selling, but prices are flexible if you come look at them.
PM with your email or cell and I can send you pictures.
Thank you for your consideration.
OEM Front Bumper and Brackets. Two holes drilled by PO for fog lights which were discarded long ago. Dirty but good condition. $60
OEM / Stock Location Spare Tire Carrier and winch. This was not installed when I got the truck, so I have not tested. Looks to my untrained eye to be intact. $15
Valley Industries (brand) Rear Trailer Hitch. I installed / used this a few times when I first got my 80 series, but have since fabricated a high clearance one that passes through the rear cross member and ties into the frame rails. $30
Con Ferr roof rack - This is not 80 series specific and is listed elsewhere here on Mud, but I also have a medium length (66" x 60") Conn Fer roof rack. It has no floor (other than the three cross bars) and is dirty with surface rust, but looks to be straight and undamaged. It comes with six (6) mounts. I have put too much time and effort into my existing rack to start over with this one and it's time to let it go. I can include some reproduction Conn Fer stickers I got from SMG a while back. This is an excellent candidate to be blasted and powder coated, with a new wood or mesh floor for a classic retro look. $275
High Lift Bar - 48" - This is the BAR ONLY... With a bit of lift and 315's, I wanted a little more lifting ability and moved to a 60" bar. This has been sitting (you guessed it) in my side yard for a year now and it's time to go away. Hate to toss it. Let's set a price of $7 or a six pack of decent IPA, Brown, or Amber ale.
None of these items are good candidates for shipping due to size and weight. All are located in Concord, CA. I tried to price these items at or below what others are selling, but prices are flexible if you come look at them.
PM with your email or cell and I can send you pictures.
Thank you for your consideration.
Last edited: