- Thread starter
- #41
License plate white LED
Some LED install tips:
For the cluster, make sure to leave the dimmer plugged in while swapping in LEDs. The LED's only work one way. If they don't work, flip them 180 degrees.
The small wire leads may need to be slightly manipulated to make full contact with the inside of the bulb holder. You may need to angle them outward or slightly pull them away from the LED.

Some LED install tips:
For the cluster, make sure to leave the dimmer plugged in while swapping in LEDs. The LED's only work one way. If they don't work, flip them 180 degrees.
The small wire leads may need to be slightly manipulated to make full contact with the inside of the bulb holder. You may need to angle them outward or slightly pull them away from the LED.