1987 fj60 ac recommendations

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Arlo89

SILVER Star
Joined
Jan 17, 2023
Threads
7
Messages
71
Location
Illinois
Replacing ac components on my 87 60. Found that I cannot locate a denso condenser or evaporator. Anybody have any aftermarket recommendations and/ or part numbers. Tia
 
Replacing ac components on my 87 60. Found that I cannot locate a denso condenser or evaporator. Anybody have any aftermarket recommendations and/ or part numbers. Tia
Just replaced my condenser (I have an '87 fj60) with this: DENSO 4710204. Replaced my drier with one from O'rielly's: Part # 33403 Line: MRY, and expansion valve with this:Part # 38616 Line: MRY. All of these items appear to be in stock at Denso: DensoProducts.com. Good luck.
 
I used a parallel flow condenser from Cold Hose in Florida and made my own new ac lines with fittings fro Cold Hose, mine was an 83 and no new condensers to be found. replaced evaporator, expansion valve and receiver drier and run r134. My temp gets down to 38, Im very pleased with the was it works.
 
IMG_6475.jpeg
 
Just replaced my condenser (I have an '87 fj60) with this: DENSO 4710204. Replaced my drier with one from O'rielly's: Part # 33403 Line: MRY, and expansion valve with this:part # 38616 Line: MRY. All of these items appear to be in stock at Denso: DensoProducts.com. Good luck.
@orbittron
That Denso part number is for a compressor not a condenser.
The condenser for a late model 60 is also NLA and out of production by Denso.
It was 477-0154

@arcadian
Nice work on finding that condenser.
 
I used a parallel flow condenser from Cold Hose in Florida and made my own new ac lines with fittings fro Cold Hose, mine was an 83 and no new condensers to be found. replaced evaporator, expansion valve and receiver drier and run r134. My temp gets down to 38, Im very pleased with the was it works.
What evaporator did you use?
 

Users who are viewing this thread

Back
Top Bottom