- Location
- United States
Selling for someone I know through work. I will try to get more detailed pictures posted soon, these are just all he has right now. Contact me if you want to see this car in person and I can set up a time with the owner to look at it, test drive, etc.
The good:
Most work was professionally done by Iron Pig Off Road (IPOR).
1984 FJ60
5-Speed H55F (Installed new)
Marlin Crawler 4.70:1 toybox (installed new)
Split-case x-fer case
Twin-stick from George (orangefj45)
4.11 diffs
ARB air-lockers
ARB air compressor
Safari Snorkle with Donalson pre-air filter box and Australian-spec air-filter box from SOR
2F engine runs excellent; 149,700 miles;
Head rebuild by Simon (Tyson Automotive Machine), 4-angle grind, etc. (3,000 miles ago)
Carb rebuilt by Marks Offroad, Dissy recurved by Jim Chenoweth, desmogged
New head gasket, new water-pump, etc.
Man-a-fre ceramic coated tuned headers, 2-into-Y system
Magnaflow muffler with 2.5” cat-back system
OME Heavies lift
ARB Front Winch Bumper w/ shackles, powder-coated
IPOR custom-made Rear Bumper, spare-tire mount, hitch, ladder, shackles, power-coated
IPOR custom sliders welded to frame, powercoated
IPOR custom rock-protector bottom plate, heavy-duty, weights about 100 lbs!
Hi-lift Xtreme Jack
IPF lights
LED cabin lights
Warn 8254-50 Winch (installed new; since water leaked in it, replaced with new motor & Albright solenoid & resealed)
12Volt-Guy Winch controller inside the cab
Dual-battery setup with IPOR solenoid setup, you can self-jump with one click if the main battery is drained.
Alpine Stereo w/Bluetooth Phone and iPhone connection
10” Kicker Subwoofer
4 Jenson speakers
(5) Mickey Thompson Baja MTZ 33x12.5x15
(5) 15x8 Black Wheels, 3.25 B/S, powder-coated
Front Procomp reclining bucket seats (not pictured)
Seat covers
Chest seatbelts installed for the rear passengers also
Repainted by the previous owner a few years ago.
All fluids were drained and replaced; hubs and birfields repacked, etc.
Needs Work:
There are 3 smalls spot with rust bubbles. I grinded them down to bare metal and primed them for now. I will try to take pictures of those.
The gas door lock is missing but I still got the lock cylinder.
The original carpet is still there but would be nice to have new carpet installed
Located in Raleigh, NC
Asking $15,000.
The good:
Most work was professionally done by Iron Pig Off Road (IPOR).
1984 FJ60
5-Speed H55F (Installed new)
Marlin Crawler 4.70:1 toybox (installed new)
Split-case x-fer case
Twin-stick from George (orangefj45)
4.11 diffs
ARB air-lockers
ARB air compressor
Safari Snorkle with Donalson pre-air filter box and Australian-spec air-filter box from SOR
2F engine runs excellent; 149,700 miles;
Head rebuild by Simon (Tyson Automotive Machine), 4-angle grind, etc. (3,000 miles ago)
Carb rebuilt by Marks Offroad, Dissy recurved by Jim Chenoweth, desmogged
New head gasket, new water-pump, etc.
Man-a-fre ceramic coated tuned headers, 2-into-Y system
Magnaflow muffler with 2.5” cat-back system
OME Heavies lift
ARB Front Winch Bumper w/ shackles, powder-coated
IPOR custom-made Rear Bumper, spare-tire mount, hitch, ladder, shackles, power-coated
IPOR custom sliders welded to frame, powercoated
IPOR custom rock-protector bottom plate, heavy-duty, weights about 100 lbs!
Hi-lift Xtreme Jack
IPF lights
LED cabin lights
Warn 8254-50 Winch (installed new; since water leaked in it, replaced with new motor & Albright solenoid & resealed)
12Volt-Guy Winch controller inside the cab
Dual-battery setup with IPOR solenoid setup, you can self-jump with one click if the main battery is drained.
Alpine Stereo w/Bluetooth Phone and iPhone connection
10” Kicker Subwoofer
4 Jenson speakers
(5) Mickey Thompson Baja MTZ 33x12.5x15
(5) 15x8 Black Wheels, 3.25 B/S, powder-coated
Front Procomp reclining bucket seats (not pictured)
Seat covers
Chest seatbelts installed for the rear passengers also
Repainted by the previous owner a few years ago.
All fluids were drained and replaced; hubs and birfields repacked, etc.
Needs Work:
There are 3 smalls spot with rust bubbles. I grinded them down to bare metal and primed them for now. I will try to take pictures of those.
The gas door lock is missing but I still got the lock cylinder.
The original carpet is still there but would be nice to have new carpet installed
Located in Raleigh, NC
Asking $15,000.
