Please forward this info to any friends that you know that might have an interest. I have owned the Cruiser for 20 years and have done ALL the work personally. Garage kept. It is not a trailer queen. It is a hard-core rock climbing Land Cruiser. Purchased and originally restored in 1993. Taken apart, painted, and restored again in 2005. Cut apart rear fenders and bed and welded in new metal in 2012. The under-side of the floor as well as the inside of the bed and steel diamond plating were all recently repainted. This truck is extremely clean and well maintained. Contact owner Bill Baxter @ (757) 715-7617 or email: bbaxter@cox.net HERE IS A LINK TO THE COMPLETE PHOTO ALBUM:
http://s1263.photobucket.com/user/Abby1986/library/Rugged%20Bugger
• Stock 4.3 liter 2F engine
• Webber 38/38 carb.
• 2.5 in. exhaust
• SM420 transmission w/new bearings and synchronizes
• 1973 Toyota low range transfer case
• Twin stick shifters
• 67:1 Gear ratio in first gear low range
• Lock Right locker in rear diff.
• Toyota electric locker in front diff.
• Electric locker skid plate
• U-bolt skid plates
• Hardened front birfields
• NEW brake lines (brakes rebuilt on a regular basis))
• BTB power-steering
• Full roll cage
• On-board air, York compressor w/pressurized roll cage and aux, air tank under Cruiser to run impact tools on trail (125 p.s.i.)
• 300 amp. alternator to power winch
• Warren XD9000i winch w/interior switch on dash
• 5/16” custom front bumper & 3/8 stl. winch mount
• Custom half doors (made from original doors)
• Rare Toyota soft doors (one has some damage)
• Best Line soft top
• Bikini Top
• Alpine stereo/cd w/four speakers
• Toyota rear jump seats w/seat belts
• Front sport seats w/factory shoulder belts
• hand throttle mounted to gear shift
• Aux. driving lights
• 3.5” lift
• Doetsch shocks
• Front-end correction kit
• Rear scissor shackles
• NEW BFG 35x12.50x15” radial mud terrain tires
• Trail-ready bead lockers steel wheels w/alum. bolt plates
• Toyota Swing away spare tire carrier
• Alum. tail-gate w/locking storage
• Warren snatch block
• Custom-made 1/4” steel diamond plate rear corner armor
• Custom-made 5/16” steel sliders integrated into the body and interconnected by a 4”x5/16”x14 lb. per ft. steel I-beam
• 4”x5/16”x14 lb. per ft. steel I-beam custom made rear bumper/skid plate w/ NEW recessed Toyota tail lights
• Front brush guard
• 1963 front bezel
• NEW front turn signals
• Round Eyes head lights
• NEW padded dash
• NEW custom Teak wood trim on dash
• Suspension articulates extremely well
• 162,022 miles. I have approx. $35k into this Cruiser - not counting any labor.
• Letting it go for $18,000.
• Contact owner Bill Baxter @ (757) 715-7617 or email: bbaxter@cox.net
FOLLOW THIS LINK FOR MORE PICS:
http://s1263.photobucket.com/user/Abby1986/library/Rugged%20Bugger
http://s1263.photobucket.com/user/Abby1986/library/Rugged%20Bugger
• Stock 4.3 liter 2F engine
• Webber 38/38 carb.
• 2.5 in. exhaust
• SM420 transmission w/new bearings and synchronizes
• 1973 Toyota low range transfer case
• Twin stick shifters
• 67:1 Gear ratio in first gear low range
• Lock Right locker in rear diff.
• Toyota electric locker in front diff.
• Electric locker skid plate
• U-bolt skid plates
• Hardened front birfields
• NEW brake lines (brakes rebuilt on a regular basis))
• BTB power-steering
• Full roll cage
• On-board air, York compressor w/pressurized roll cage and aux, air tank under Cruiser to run impact tools on trail (125 p.s.i.)
• 300 amp. alternator to power winch
• Warren XD9000i winch w/interior switch on dash
• 5/16” custom front bumper & 3/8 stl. winch mount
• Custom half doors (made from original doors)
• Rare Toyota soft doors (one has some damage)
• Best Line soft top
• Bikini Top
• Alpine stereo/cd w/four speakers
• Toyota rear jump seats w/seat belts
• Front sport seats w/factory shoulder belts
• hand throttle mounted to gear shift
• Aux. driving lights
• 3.5” lift
• Doetsch shocks
• Front-end correction kit
• Rear scissor shackles
• NEW BFG 35x12.50x15” radial mud terrain tires
• Trail-ready bead lockers steel wheels w/alum. bolt plates
• Toyota Swing away spare tire carrier
• Alum. tail-gate w/locking storage
• Warren snatch block
• Custom-made 1/4” steel diamond plate rear corner armor
• Custom-made 5/16” steel sliders integrated into the body and interconnected by a 4”x5/16”x14 lb. per ft. steel I-beam
• 4”x5/16”x14 lb. per ft. steel I-beam custom made rear bumper/skid plate w/ NEW recessed Toyota tail lights
• Front brush guard
• 1963 front bezel
• NEW front turn signals
• Round Eyes head lights
• NEW padded dash
• NEW custom Teak wood trim on dash
• Suspension articulates extremely well
• 162,022 miles. I have approx. $35k into this Cruiser - not counting any labor.
• Letting it go for $18,000.
• Contact owner Bill Baxter @ (757) 715-7617 or email: bbaxter@cox.net
FOLLOW THIS LINK FOR MORE PICS:
http://s1263.photobucket.com/user/Abby1986/library/Rugged%20Bugger