- Thread starter
- #21
@fireball sure did, and yes very happy. I went with a generic wheel adapter (cant remember vendor) to convert the 5x5.5 on the dexter axle I installed to the 5x150 bolt pattern. with the 1.5" spacers, I was able to keep the axle 3" narrower to run the 275/70R18's I used to have on my truck, and enough room to eventually go to the 295/70R18 I have on there now. This increases the overall weight capacity of the axle as well.
Overall it looks good, and will be nice to have 1-2 spares between the one on the truck, and one in the trailer that will work for truck and trailer alike.
Overall it looks good, and will be nice to have 1-2 spares between the one on the truck, and one in the trailer that will work for truck and trailer alike.