100 Series General Tech and Classifieds (26 Viewers)
- Thread starter wngrog
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Clutchee
I'm fun sized!
May wanta ask for undercarriage pics; based on loacation salt maybe issue.
Riding in armored vehicle before for Toyota if it's done right it's seamless and not noticible; unless you open doors and look at glass thickness.
But if it's been in non salt area; seems good.
Riding in armored vehicle before for Toyota if it's done right it's seamless and not noticible; unless you open doors and look at glass thickness.
But if it's been in non salt area; seems good.
Speaking of big racks, my brotha from the same motha, the one & only @BillRiley, hooked me up with a bro deal on a ballin' hitch rack for my hunnit. It's stout.
It's also got an add-on extender piece that holds two more bikes, but that makes it friggin' huge, so I'll just throw it on when I need it.
The tailgate & hatch are 100% usable, even loaded down with bikes.
If you find yourself headed to Asheville and you need bikes, bike parts, bike accessories, or even a custom hand-crafted frame, hit him up. He operates a shady bike business out of his basement (no, really). I think he offers a mud discount.
It's also got an add-on extender piece that holds two more bikes, but that makes it friggin' huge, so I'll just throw it on when I need it.
The tailgate & hatch are 100% usable, even loaded down with bikes.
If you find yourself headed to Asheville and you need bikes, bike parts, bike accessories, or even a custom hand-crafted frame, hit him up. He operates a shady bike business out of his basement (no, really). I think he offers a mud discount.
I ship bike parts too. Occasionaly, I can also MudShip from Asheville to Memphis or Asheville to Hattiesburg
jfz80
Cruisin’
Maybe i can pick up some pointers here without having to dive into 100 tech. Buddy just picked up a 99 and ill be going over it with a lil round one baselining. Its had a bit of a humpty dumpty life and a few pieces never got put back. I dont have any 100 owners close by to compare with or an FSM
Sooooo what goes here ?
4 plugs open in the upper pass side engine bay. 2 black. 1 gray. 1 white.
Or were they extras for other world markets ?
Sooooo what goes here ?
4 plugs open in the upper pass side engine bay. 2 black. 1 gray. 1 white.
Or were they extras for other world markets ?
Nothing goes there on the LC. I've always been told Those are the plugs in the harness on the LX470 for the AHC pump
Did it have AHC suspension on it? That is where the module mounts and does have several plugs attached.
jfz80
Cruisin’
Thank you much DNP!
Ckelly i do not believe AHC was avail in 99. If so this one doesnt have it. Thanks again.
Dont suppose there are any parts 100s in the club. Need an air intake box though this one is likely missing due to wrinkly inner fender misalignments. Still. The K and N is killing me.
Looking for section that connects inner fender over to MAF sensor i believe.
Ckelly i do not believe AHC was avail in 99. If so this one doesnt have it. Thanks again.
Dont suppose there are any parts 100s in the club. Need an air intake box though this one is likely missing due to wrinkly inner fender misalignments. Still. The K and N is killing me.
Looking for section that connects inner fender over to MAF sensor i believe.
Bomar
SILVER Star
Trying to keep up with the #EAF crew. Was not happy after BB trip with fridge access and it moving side to side with high speed jumps and stuff.
So got on interwebs bought a few things second hand and made this.
Pretty happy with results.
Got most important things fridge and big people and little people s***ters. In truck all time.
So got on interwebs bought a few things second hand and made this.
Pretty happy with results.
Got most important things fridge and big people and little people s***ters. In truck all time.
Bomar
SILVER Star
- Thread starter
- #6,636
Brilliant use of space.
Now get a trailer.
Now get a trailer.
Dunno. May be a proximity problem there for me 
Looks great though, B!
Looks great though, B!
You're gonna need a staging area in arm's length of the cockpit. Can't grab miller lites from way the hell back there.
Bodean
Hot Damn
- Thread starter
- #6,640
Yeah Bomar is down to a 39" waist so he's not heavy on that these days.
That said, I love mine on the drivers rear seat area. I can access without opening those awful swingouts.
One kid on small seat. One on the 3rd row.
That said, I love mine on the drivers rear seat area. I can access without opening those awful swingouts.
One kid on small seat. One on the 3rd row.
