split case

Selling my other 2F, going to a diesel. This would make a pretty sweet setup to drop into an earlier year 40 and add power steering. This engine is out of a '79 that was used as a parts rig due to a high school auto shop butchering the rusty body. I got it running for the first time in about 20...

Looking for a full set of bolts to attach the front half of the split case to an H42. This is an early 60, so no spacer on the H42 - shorter bolt set. If there's a good substitution out there, I'm all ears. So far no luck.

We’re looking for a good drive hub ( part of the OD input gear cluster ) for a 19-spline split case overdrive unit. Here are a couple of pics. Thanks in advance! Need this part to help a customer in Alaska get his cruiser back on the road. Georg @ Valley Hybrids @ Cruiser Brothers Shop...

I have a bad habit of buying parts and asking questions later. Now it’s time to clean the garage out a bit. Located near Boone, NC Split case and transmission from a very early FJ60 (1980 - maybe 1981?). This case will not work with the later h42s or h55s. I think it’s similar to what was in...

I thought I’d share some more tech info from our daily work here at the shop. Earlier this week I started building another transmission and Tcase combo for a long time friend; @wngrog The requirements for this combo going into an FJ40 build: 1981-1984 short 19-spline output H42 New OEM...

1981 FJ40 4 speed tranny with split transfer case. The transmission shaft turns by hand smoothly in neutral. Transmission and transfer case shift between gears easily. $800 for the tranny and transfer case ($400 each). Offering the bellhousing for $60. I prefer a local pickup, in Southern...

I am in the middle of my 40 build and am considering a change in direction from a more mild build on 33s and going straight to 37s. I had another build planned for big tires, but having thought about this all winter I have decided yet another rig isn't worth all of the money, hours, storage...

Hey guys, starting tearing down the transfer case for a rebuild, mainly due to a whine it had developed. I has eliminated front and rear diffs as possible culprits. Idler shaft was worn out just about as worse I had ever seen, luckily it and the bearings are included in the kit from cruiser...

Includes Shift fork, slave cylinder and shift knob. I've had this for about 5 years and prior to my purchasing it I have been told it was rebuilt by JimC? with new bearings, seals and gaskets and still has zero miles. Located in Milwaukee, WI $2700

I have a 76’ FJ40 with a 700r4 transmission married to a split case off a FJ60. I’m looking for a twin stick shift linkage or info/links to a recommended shift kit.

Hi I just got my split case transfer off the back of my H55F. Vehicle (1989 BJ60) originally ran an H41, which the PO has upgraded to an H55F at some stage. As far as I can tell, the front half of the transfer case is the original mechanical shift type for the four speed. It has the redundant...

Hey guys I am after a later 60/62 series transfer case must be the 38 mm idler. Let me know if some one has one for sale. Thanks

Hello, I am almost finished with a drivetrain project but I am missing bolts! I need the 7 bolts that mount the split case to the h42 long (spacer in back) I don't know the lengths of these bolts either. If someone has that info I would be very grateful. So, bolts or even info, Thank you! -Matt

Quick question. Leaking from selector shaft. Everywhere I look it shows the oil seal and boot to be different part numbers. When I investigated under the truck, mine looks to be one part. The boot and seal seem to be one. Doesn’t look like it can be separated. Anyone ever see this? MOD or...

Is the 19 spline “pattern” (pitch and diameter) on the 80-89 “split” case the same as 19 spline pattern on the 80’s HF2A? (Obviously the length is different) (I am trying to find a source for a spud shaft)

Good used 38mm vac controlled transfer case from a 88 Fj62. 210k. Ships from 32609. Case must be disassembled for removal/ shipping. $350. Buyer pays actual ups shipping or can provide a shipping label.

Hello folks. I am NOT in the process of converting my transfer case from vacuum shift to manual... but I'm hoping that someone who HAS performed this mod still has the vacuum diaphragm sub-assembly laying around. I posted this in the WANTED section of the classifieds (here), but haven't had...

EDIT: SOLVED, FOUND ONE! Lucky me, I took a rock in a perfect place to punch a quarter-sized hole in the piece shown below. It's the vacuum-actuator on my 1989 FJ62. Hoping someone has a totally junk split case laying around and is willing to sell me that cover! There's the option of welding...

I'm getting ready to do this swap with my friend @FARMAN33 I've got a new H55F and rebuild split case from Georg. That will make most of this a direct swap into my 87. We will not be using anything from the old set up aside from the t case linkage. Here are the odds and ends that I've got...

Hello, I’m looking for a 13BT Diesel engine with or without a H55F 5 speed transmission. I’m also interested if you have a split case transfer case to go with them too. Thanks