setting

  1. Bomar

    Aftermarket steering wheel correct adapter

    So I bought a refurbished OEM steering wheel but never have been a fan of a 20+ yo airbag in my face as I drive. So that lead me down a rabbit hole while down with a bad pain and on pain killers. I started off with buying an adapter that worked but lost cruise control. I have never really...
  2. F

    Replaced A/C resistor. Still not blowing on Setting #3 afterwards.

    Hello everyone, I just replaced the resistor on my 1992 today. Before that, the 3rd A/C setting wasn't blowing and I read that replacing the resistor would get it back. Well after replacing the resistor, I'm still stuck in the same boat with no #3 setting. The first two and the last settings...
  3. DrCruiser

    Finally Bought the KONI HT RAID Shocks for my LC HZJ76

    After a lot of research and confusion I bought myself two pairs of Koni HT Raid shocks. It will be over $1700 with shipping and tax. But I am confused. When I install these shocks, which rebounding setting should I opt for? and how do I do it?
  4. brooks202

    Interior ventilation lowest fan setting has no output

    I've got an '87 FJ60 and when I flip the switch to the first fan setting on the heating system the only thing that happens is the passenger seat heater turns on if its master switch is on. all the other settings work fine. My buddy tells me its a fuse, I think its possible its a feature to only...
  5. hkeller

    Can't turn off 4-Zone climate setting.

    Any idea why 4-Zone won't turn off? I push the button on the climate screen and nothing happens.
  6. F

    HVAC question Heat only on HI heat setting

    OK, just noticed on my 14’ when I turn my heat on, the vents blow the same cool air from the LOW setting all the way up to 85 degrees……no change at all in the temperature of the air coming out, it’s like it’s stuck on LOW temp. Once I turn it to HI heat, hot air comes out……like HI heat hot air...
  7. Broski

    Toe setting real time help

    I’m trying to set the toe in on my 80. Yes I’m using the FSM I’m reading this as 2MM each side ?
Back
Top Bottom