oil cooler

I purchased this oil cooler and downward facing oil filter housing combo anticipating a turbo on my 3B from a wrecker off the shelf hence an unknown 3B or B series engine variant. Can anyone tell me what it is from?? and why it seems to be missing the oil lines to the vacuum pump on the back of...

I thought this was a standard item as on the LX470 but I guess not. Can ne1 confirm or am I looking in the wrong place? Should be in front of the AC condenser correct?

I'd like to add an oil cooler to a 2F. The factory setups seem to be uncommon and on the expensive side (compared to a cooler I already have) since the oil tap at the filter is pressurized. Am I looking in the wrong place (ebay)? Is there an easy way to tap into the unpressurized side of the...

Hello guys Im building a stroker 105mm 1FZ-FE with lots of goods and Im gonna punch the hell out of it so im wondering if I need to have an oil cooler kit similar to this one?: Hayden Fluid Coolers 1040 what is your thought guys? should I just buy a kit? or just make my own one like buying a...

Hello all, I have a 95 with 150k - runs well - good compression and yet I have that lovely chocolate milk frapuccino crud in my radiator and overflow. I took apart and checked the oil cooler - redid seal and pressure tested. All good. Still oil in coolant. Then got the head gasket and all that...

Hello All, I purchased my 79 FJ40 a few weeks ago, my truck has the oil cooling system on the side of the block. After further inspection I realized that the "cooling portion" of that system is bypassed, in other words the coolant from the engine is not circulating through the oil cooler. I live...

I'm new to the Toyota world (and the diesel world), but have been a long time shade-tree mechanic so I like to think I'm pretty competent. I took on a project for my cousins to get their '77 BJ40 kicking again in two stages... first, diagnose and repair the existing B motor and second, install a...

Found a substantial crack in my 3B oil cooler case. '77 BJ40. Here's the part I need. Labeled "Oil Cooler case" Oil cooler breakdown by Aaroneous posted Oct 29, 2016 at 10:21 PM My cracked one... Cracked oil cooler case by Aaroneous posted Oct 29, 2016 at 10:21 PM Thanks in advance!

While changing my oil this go-around, I decided to address a small leak between the oil cooler and the engine block. I proactively ordered the correct new O-rings (QTY 2) from $OR to be ready for the job. Pulling the oil cooler off, I didn't find any o-rings, gaskets, nada; which kind of...

truck had 175k. All parts are assumed to be original. Power steering pump with res- $50 Misc smog lines and some valves still available- let me know what you need and we will work it out. Intake cover- $20 Intake and exhaust manifolds- $60 each Oil cooler- $50 2f short block - $100 4 speed...