manifold

  1. Stickfort

    For Sale Bend, OR - Bj60 exhaust manifold

    I’ve got the manifold and heat shield off a 1983 bj60 with 3b. Removed after I added a turbo manifold. $50 + shipping or local pickup
  2. Engineer8000

    SOLD NC: 2F Exhaust Manifold

    $100 + shipping. I don't know anything about these, if there are common issues and you need more pictures let me know.
  3. Sweatyforehead

    ISO manifold file for 2H cylinder head

    HI all, Im in the process of building my own custom turbo manifold and I was wondering if anyone here happens to have a CAD file or similar of the 2H's cylinder head exhaust manifold flange pattern. Or if anyone knows where I can purchase this type of bare flange. TIA!
  4. Yankee

    2F Hesitation/stumbling at various RPMs

    Hello all, I'm having a weird and frustrating issue with my 1985 2F FJ60 that I was hoping I could get assistance for. A couple of weeks ago it was running fine and dandy, then one night on my return home from Taco Tuesday it started to pull and hesitate from 1500-2000 RPM intermittently. I...
    • Yankee
    • Thread
    • carbuerator fuel filter fuel pump manifold vacuum
    • Replies: 39
    • Forum: 60-Series Wagons
  5. yotamotive

    SOLD 17111-61010 2F Intake manifold 1975 1976 FJ40 New Mexico NM

    $50 plus shipping. PM me. Thanks
  6. Advrider639

    Wanted 2f exhaust manifold

    i need to replace my cheap headers…. They’re really causing me issues. Looking for a crack free exhaust manifold, some what local to Atlanta ga.
  7. peacesells63

    SOLD New 1fz 6boost turbo manifold and borg warner s300sx

    New setup, only bolted on for mock up. The manifold is setup for a 50mm wastegate and is divided. Turbo is identical to the wits end setup but has a larger .88 open (non divided) exhaust housing that has been polished. Located in Flagstaff, Az. $2000 shipped in the lower 48. This would be a...
  8. jbee

    Can I remove these head bolts? Intake manifold gasket questions.

    Photos attached. 4/72 fj40. Stock as a rock. Rebuilt carb going on so I’m fixing vacuum leaks. Can I remove these 2 head bolts and then put them back in /torque without causing any trouble? I need more access to replace the manifold studs. I guess I could re-torque all the head bolts per the...
  9. Wadesters

    SOLD Oil Filter Canister Spring / Exhaust Manifold Studs. *** see pictures

    All for a 1965 FJ45. One spring needed (can't believe it did not come in oil filter kit, robbed picture of one below) and 2 exhaust manifold studs manifold side is M12 1.50. I have bolts I can use but would rather have the correct studs. Thanks...
  10. 2mbb

    SOLD AIr Injection Manifold for FJ60 (1985)

    I am looking for a good condition air injection manifold for my FJ60 (CA registered). I would be interested in the unions, too, if you have them. Thanks.
  11. Toshi38

    1PZ Exhaust CAD files

    Does someone have a dxf or other CAD file for the exhaust flange on a 1PZ? I'm planning to weld up a new turbo manifold similar to what I've done on my 3B and would ideally start with getting a flange cut on the waterjet.
  12. J

    For Sale Iowa - 2f OEM Exhaust Manifold

    Selling the exhaust manifold off my 1976 FJ40 Price 145 + Buyer pays shipping
  13. CharlieS

    ARB manifold orientation?

    Are there any guidelines about how the ARB air locker manifold needs to be oriented? My 80 came with an ARB compressor and lockers, with a mount that was kind of janky, so I'm trying to relocate it. The manifold came to me with the air chuck on the high end and the air line from the compressor...
  14. elripster

    For Sale Escondido, CA, 2F Exhaust Manifold, $150

    The description says it, selling the manifold off of my FJ60's 2F. It has no cracks, I replaced with 3FE manifolds so don't need it anymore.
  15. C

    Wanted WTB: 1HD-FT / FTE Exhaust Manifold

    Factory or aftermarket is ok; please square port only; 1HDT (12 valve) will not work. I could survive with just the smaller half of the manifold as well if someone has one. Cash in hand! TIA!
  16. Fantastika

    Is it fine if the wastegate actuator is really close to the exhaust manifold?

    And i mean like 10mm from it
  17. Beehanger

    Dear mother of God. Top of intake manifold not flat.

    Gentlemen, I’m noticing post engine rebuild and reinstall I’ve got myself in a big pickle right when I thought I was at the finish line. ! I’m beyond my scope on knowing how to protect fix this one and seems like I have one shot at it. The Intake manifolds carb surface isn’t flat. I took a wire...
  18. TheBussman

    SOLD Stock 1hdt ct26 turbo, exhaust manifold, crossover pipe (1hz turbo kit) OH

    removed from an engine I bought from great seller chapelgate. has new pipework, gaskets, hardware as shown. the engine it was removed from was said to have 198000 miles, 1994 model. you would think that somebody would put all the new parts on the turbo if it was being rebuilt but I cant confirm...
  19. S

    1KZ-TE Exhaust Manifold Stud Torque Specs

    Hey all, Does anyone know what the torque spec is for the exhaust manifold studs for the 1KZ-TE? I just replaced the studs and the Max Ellery manual only lists the torque specs for the nuts, which is 38 ft Lbs. So far I have only torqued the studs down to 10 Ft Lbs because I’m afraid to go...
    • Slogg
    • Thread
    • 1kz-te exhaust manifold stud torque
    • Replies: 5
    • Forum: 90-Series Tech
  20. kevos37

    SOLD Norcal/ Early FJ40 manifold set

    Have a exhaust intake setup for grabs. The heat riser works freely. Looks to be in good shape, no cracks. Price update $200 obo plus shipping. I have been using pirate ship postage. Have gotton some pretty good rates. Cause we all know this things on the heavy side. Lol. Cheers KevO
Back
Top Bottom