air

Hi, I've seen this mentioned a few times in different threads but to my knowledge no one has detailed the exact solution. So here goes. As soon as temperatures would drop below 0°C (32 F) my 1991 PZJ-77 would have a hard time starting. The colder it would get the worse the symptoms. Chuffing...

I have 2 sets of 3x buttons for sale: Each set is $50 + $8 shipping These are 3D printed with 3 coats of UV clear coating for permanent protection -- Let me know which one you want -- Thanks, Mo

Recently acquired a 2010 200 but the AC will only work properly if the cool box is turned on. If the box is off, ac button is on, then it works for a few minutes but then the air goes to warm. If cool box is on, ac cranks cold as it should. I have already verified blender door is working...

Would clean up fine... threads on rod are boogered up a bit. $40 plus shipping. Please PM

This came with an engine I bought - free for price of shipping... please PM me

Hi all, the cabin air filters that "should" work for this year & model don't fit and are much too long to fit into the filter slot. (See pics below). Does anyone know of a filter that would work for this model? I've got a 1998 JDM LC100 VX (Model: KG-HDJ101K-RNPGZ) and I've seen tutorials on...

I have an FJ40 series air compressor mounting bracket for sale. This bracket came off of my 1982 FJ40 (without power steering) and is stamped "146270-1010". In other posts, this bracket is identified as part number "88431". Asking $60.00 shipped within the USA (actual shipping cost elsewhere).

Nice air cleaner for 79 fj40. Sandblasted and primed with black epoxy primer. Top coat is Hot Rod Black urethane. Sticker included is for a 79 but not attached. $600. Plus shipping

Selling a very good fj62 air cleaner assembly. No rust just needs cleaned up a bit.

I have a stock 2008 GX470. I can set the air suspension at any height and it will stay and not droop at all even after days. Bust as soon as I drive it, within a mile I am in the bump stops. At stop signs I can raise back up. I sprayed everything I can see with soapy water and can’t see any...

Part # 22250-61010 TIA

Good afternoon everyone! My 1967 FJ 40 has its original oil bath air cleaner but I just discovered I’m missing the steel mesh insert. Any idea where I could score one?

Looking for a 2F carb hat or ideally a complete non us air intake assembly from fender to carb. Thanks,

Looking for good used 22270-61010 air control valve for 3FE transplant.

Does this look right. The bag mounts are not right underneath each other. The top mount is leaned toward the front of the vehicle

https://vintageteqparts.com/products/net-air-duct-87294-60031-fj40-9-73-1984-lives-once-again-snow-version-grade-improvements-made-also?_pos=1&_sid=c67b93225&_ss=r ,. NET , AIR DUCT 87294-60031 FJ40 9/73-1984 Lives Once Again , " SNOW VERSION " Grade Improvements Made Also ( DETERS MICE AND...

After changing my heater tees, noticed this small hose on top of my engine was leaking air. I’ll attach a photo below, as a temporary remedy I put some duct tape to stop the air from leaking out. If anyone could help me identify this hose it would be greatly appreciated

I am looking for a good condition air injection manifold for my FJ60 (CA registered). I would be interested in the unions, too, if you have them. Thanks.

Do you need your rear shocks if you install the boss airbag system

Hey All, anyone know of a wrecked or parts from a later 80? Looking for the top of the airbox for my LS swap