I have a spare IAC that I sourced from CruiserParts that was tested by them.
https://shop.cruiserparts.net/index.php?main_page=product_info&cPath=6_7851&products_id=38442
I did not end up using it but can confirm it works after bench testing it and testing it on my rig. My low idle was...
I have a new in box ARB 12v air compressor for lockers. I paid $230.00, but looking to get $115.00, plus shipping. (I ended up going a different direction and did not install this one.)
Thanks.
1991 FJ80 with about 214K miles, 3FE engine, in no small part by the generosity and graciousness of the folks here it's almost road ready. After I get just a few more mechanical problems fixed, the next project is to get more cool air to the back of the vehicle.
I'm pretty sure I'm going to be...
Got a '73 FJ40 that is sagging in the rear. This is due to moving the gas tank to the rear, a heavy rear bumper, tire hanger and spare tire. Adding up all of this extra weight is roughly 350 pounds.
I was looking at some of the aftermarket airbag kits and wondered if anyone had ever done...
Hello All,
My name is Max and I am the proud new owner of a ‘77 fj40(pictured; likely a Columbia FJ since there’s NOTHING in place to add a heater). It’s in great shape and restored by the PO, but he’s in Florida where there’s not much need for heater…which is a little different than...
When we bought Ms. Scarlet in 2017 the Clardy air installed in 1983 was dead. Replaced the compressor with a York and replaced the dryer. Everything else was good to go. Spent the extra money to stay with R12 for better cooling on the advise of the mechanic.
Everything has been good until this...
Experiencing something odd.
2000 land cruiser. 200,000 miles.
When pushing on the gas both in park, and while driving, there is a loud rushing sound of air. I believe it might be fan related, but I'm not sure.
It is not affecting performance but I am concerned as we are preparing to leave...
NOS Japanese-Made aftermarket Air Injection Check Valves to fit '73-'87 FJ40/FJ60, but I am told these are the same for 3FE - buyer will have to verify 3FE application. High Quality. I think these are even better made than the OE ones, as they have a metal shield on the hot exhaust side to...
I probably should have made a build thread somewhere along the line 10 years ago....
As I've been slowly reassembling, I'm finding all the little things that need repaired. With the heater and blower complete, I found the cables and they were pretty rough.
I searched and found some different...
I'm putting my 1971 fj40 back together and I noticed a nipple for a vaccuum line on the air breather that I don't remember removing(see pic below). I'm guessing it is no longer used after it was de-smogged, but can anyone put my mind at ease and let me know for sure? If it is unused, should I...
Was the rear air suspension on the GX470’s an option or standard equipment?
I ran across a very much stock 2005 GX470 and there’s no air/suspension control panel. Just one of those small pockets. From talking to the owner, they didn’t have any idea. Of course, they’re not the original owners...
Have a '99, no lift, and not sure if springs + shocks are original or not but love the ride. Soft but yet corners well. No sag under normal use.
Recently went glamping with a LOT of heavy gear and the back sagged. Am also looking to tow our lighter boat <3500 lbs.
I'm familiar with the...
I bought this kit from Joe Katana a few year ago --- I am selling it for what I paid for it -- $2500. new in box, never opened.
I bought it assuming the 73 series I found would not have it, but in the end I found my Unicorn, Inigo.
It is a 12v kit ..... although @joekatana said he should have...
I currently have a NOS Vintage Air unit (part # 75080-LTZ-A) that was installed by the PO on my '81 US Spec 40...worked great for about 1 year and then on a 2 hour trip over the summer into the GA Mountains, I noticed that it was no longer blowing cold air. Skip ahead a few months, I made sure...
2003 lx470
There is a front plastic cover on the air intake connector that completely popped off the other day, I'm not sure what this is for.
I was getting running lean codes randomly before and I believe this was loose and the culprit, struggling to start when truck was hot.
I've tapped...
I am having issues with the Mode button. I have to press it multiple times for it to change Modes. Anybody else have a finicky Mode button? If so what is the fix?