Search results for query: *

Forum search Google search

  1. A

    pictures of grinding shift gate for 2 wheel low

    Neither driveshaft will spin????? Brian, The only way the rear d-shaft won't spin is if the rear wheels are off the ground, or it's removed , and inside the truck!!!!! Earl
  2. A

    Where to find a lockable Jerry Can Mount?

    I BUILT MY OWN, USING A PAIR OF TIRE MOUNT HINGES, AND LATCH, WITH HOMEMADE CATCH ON THE FRAME. tHE INSIDE OF THE RACK LOCKS, AND OPENS TWARD THE TAILGATE WHEN THE RACK IS SWUNG OUT. tHE SECTION THAT OPENS HAS BARS THAT SECURE THE CANS WHEN IT'S CLOSED. I SOLD THE 40 THIS SUMMER, AND GOT WHAT I...
  3. A

    Vacume???

    Timing Mac, I wrote my previous message assuming you had a vacuum advance dizzy, and either way the line should go to ported vacuum! When you get the lines correct, (Please see a manual) then set the timing at 7-8 degrees advance, with the vacuum line off the dizzy, and plugged, and at...
  4. A

    Vacume???

    Vacuum hook ups Hi, the one thing I see besides the "no check valve", is that you have the vavuum advance on the distributor direct to the manifold, it should be to the capped, ported vacuum outlet on the carb, just behind where it's hooked up now. You don't want advance at idle, and thats...
  5. A

    Dash Pad

    Dash cover Hi, I re-covered my dash with Cool Cruisers of Texas' cover, arround $55.00. IT glued down ok, but had to put several braces from the seats to hold the bottom edge, and weighted the top at the same time. HTH, Earl
  6. A

    Racks...

    Racks Here's a picture of mine, I believe it's a MAF, but not sure, any help out there?
  7. A

    Air Conditioning on a 40

    A/C/ in a 40, A DIFFERENT IDEA! Here's a shot of the conversion van rear unit, suspended from the roll bar, and installed so the top can be removed! The r/f/motor mount is FJ-60, with a custom mount plate for aa compressor from an '81 Datsun 810 wagon, the condenser came from the same car. The...
  8. A

    F distributor needed...

    Put this wanted ad in the parts wanted/for sale section, you'll have better luck! Earl
  9. A

    Pitman Arm Installation on Mini PS Box

    Juke, I used Bill Dorey's mount, and it uses the original pedistal holes. I centered the box, and re-installed the pitman arm with the wheels in the same position as before the arm came off the old box. That worked great, and was simple! Keep it simple I always say! Earl
  10. A

    Engine Oiling system HELP PLEASE

    Aaron, You may have mixed up the rocker shaft standards, I did it myself. There's only one with a drilled passage! It's the second one from the front! Good luck, Earl
  11. A

    hello all...now with pics

    Cup holders?????? Earl
  12. A

    Homemade!

    Brandon, I think the roof rack is a Con-Fer item, but I'm not sure. Earl
  13. A

    What Does The Inside of Your cruiser look like?

    What should the inside look like? Why don't you get a Spector Off Road catalog? Earl
  14. A

    Homemade!

    Brandon, Here's a picture of the jerry can holder I built! It's 3/4 square tubing, a piece of sheet metal where the liscense lamp and plate are mounted, the entire rack is hinged on early tire swing out hinges, and 2 piece latch assy. , the side that faces the truck is the side that opens, has a...
  15. A

    original air cleaner

    '74 air cleaner I'm with Ed, except mine has a rubber gasget top, and bottom. Earl
  16. A

    How Can I Check Fuel Pump Flow / Pressure?

    Have you checked the hidden screen filter under the fuel inlet on the carb? Earl
  17. A

    Distributor (which diaphram)

    Micheal, The picture is of a vacuum advance dist. HTH, Earl
  18. A

    how many liters if my 2F

    How big is it Max, Thats assuming it's not the original engine, which was probably a f and 1/2, or a f block (3.9 liters) and 2F oiling system with a full flow oil filter system.
  19. A

    Brake booster

    Haystaks, First the rod should be shortened if it's not releasing, and second, a neat replacement booster/master is a complete unit from a 95 Tacoma, with a 1/2" spacer between the booster, and the firewall. Bought one at a re-cycler for $75.00, a lot better than oem, and the brakes are much...
  20. A

    Belt routing Problems-need suggestions

    Belt options Bailey, Would a longer belt and using the compressor adjustment, lower the York enough to have the belt clear the housing? Does the York have a double pulley? It looks like it does! I think lowering the York seems to be the easiest way out, but that's just judging from the...
Back
Top Bottom