FJ40/T1 fuel system ?
On another note, I am installing a 93 T1 350, which is TPI, in my 76 FJ40, and I think that the el cheapo replacement plastic tank is not going to be abe to hande my fuel requirements. So I am looking into an aux. tank/or for it too be my main tank. Any recomendations out...
Go for scout steering
I am in the middle of doing my ps conversion, and after all the trouble with the minitruck ps,(clearance issues with my exhaust), I went with the IH Scout setup. I had to get the box shipped in from CA, it was the only one that NAPA had,but when I mocked it up on my frame...
scout/conversion
Thanx for info fellas. Couple more questions though. At NAPA they listed 4 different ps boxes, as follows::bang:
1971-74 with 13/16ths input shaft = in-stock item
75 ONLY XLC ?
1976-79 3/4" input shaft =special order
1976-79 13/16ths input =Special order
Which one should I get...
Can any body that has done IH Scout psteering conversion on their rig give me some help? Like how does it work? Where can I find a box,preferebly rebuilt (around Charlotte,NC) ? I have read the thread and I have more questions.
I installed one a while back, had to do some minor tweaking but you have to on all body parts, somewhat. Other than that ,I liked the quality.Trying to post up some pics,but need to resize. Later.
Thanks for the input dgangle, but I am running a late model LT1, not a 400. And factory they had this steam port that is hooked into the radiator from the heads, I was wondering about it because the motor has the radiator hoses and hardlines setup for this. I just have concerns about temps since...
steam port /Downey
I am also installing a taurus 2spd fan and shroud. I think it will work well with the stock 4 core. I also plan on putting in a/c too, hence my questions about the radiator size and such, I just didn't want to have to replace the radiator after I installed the a/c. I also...
Does anybody know what thickness a STOCK 76 fj40 radiator is ? I think the one in mine is thicker,therefore has more cores than stock.I am putting an LT-1 350 in it and everybody says to upgrade the radiator to an aftermarket one. When I had my 2F in it ,it would take a solid 15-20 minutes to...
Hi all,I need some direction on purchasing a mostly complete transfer rebuild - overhaul kit ,76 4-spd case,any suggestions ? Should I get it through Toyota or someone else ? It only has 114,000 miles on it ,but it had a bad leak at the rear outpout shaft, so while I have it out I want to...
To wes1977,it's better than new because we sandblasted the indivdual pieces and epoxy primer coated them,and painted them with 2 stage PPG Toyota Super White.YEAH !
I have rebuilt my 79 hardtop ,took it apart and blasted it and restored to better than new.Now the issue ,can anyone help me with putting it back together,(not physically),but a body manual with locations on where to put weatherstriping and gaskets ? I didn't know there were so many .:crybaby...
Would it be fairly simple to take the front disc brakes off an 84 4Runner and put them on the rear of my 76 FJ-40 ?And where would I get the brackets ? I already have the 4Runner,for parts,and I want 4 wheel discs on my rig,so ,hence the tight ass comes out in me.
Has anybody run these before ? I want to buy a set for my Cruiser,want to make sure you know ? I am putting a TBI SBC with Turbo 400 running a JT PS bracket with mini truck PS. Wondering about ps gearbox clearance for heat ? I can only cock the motor over to the passenger side so much because...