Search results for query: *

Forum search Google search

  1. notaf-ingjeep

    Want to drill straight accurate holes in frame

    I am looking to drill a couple new mounting positions in my lower link brackets for my 4-link. I made the mistake of not drilling out the brackets with a few mounting positions. It is now welded on the frame in a serious fashion, I'm not cutting it off. I want to do some experimenting with...
  2. notaf-ingjeep

    Builds  This Is Not A F-king Jeep

    Here you go, this is it as it is sitting. The Mormons love my window sticker!! No offense intended
  3. notaf-ingjeep

    Scout steering pump modification

    I am having a hard time with this pump I have from a scout II. To start, I identified the ps pump that is on my cruiser already. It has to be a chev saginaw, it looks almost identical to the scout II pump. Except it has a larger pulley, and the output fitting is different. All the stuff...
  4. notaf-ingjeep

    steering problems

    All right, I've been on this suspension and wanted to upgrade my heims. This got me going on my steering, as my heims would make a good unit there. I got some free 1.5" solid aluminum hex I can make some new tie rods with. I have had the "death wobble" I added that to bad alignment. I...
  5. notaf-ingjeep

    Steering box choice, want opinions

    I need new steering, I have power steering but.... It is the push- pull box in the back of the fender. I am also planning to update the soa sr I am running. Have some small issues with my current set up, On the drag link, pitman arm side, the tie rod end hits spring, under extreme...
  6. notaf-ingjeep

    Wanted  FJ60 front cv driveline, 84-85 yota cv

    Looking for a front cv driveline 84-85 solid axle yota pickup. I would possibly take a 86 toyota ifs front driveline with cv as well. looking for one to mate up with my land cruiser 4-speed t.case output. I would be very inerested in an fj60 front cv driveline as well. I believe that these...
  7. notaf-ingjeep

    Toyota cardan Joint

    Hey, I was working on a driveline last night. I thought I would get more from what I was going to build, but.... It bound up at the transfer case with less travel than anticipated. I've heard and read about guys using the cardan or cv joint from the front driveshaft of a mini truck. 84-85...
  8. notaf-ingjeep

    27 or 30 spline longfields

    Hi I was just wanting some opinions before I made a purchase. I am looking to add some longfield or "other brand" birfs to my cruiser. I just did a 4-link and 14" coilovers in the rear. I am also adding some 1.5" wheel spacers to my rig with 35 x 12.5 swampers, and lockers. My knuckles...
  9. notaf-ingjeep

    4-link bump stops, opions please!!!

    Hey guys, I am finally getting ready to mount my 14" fox coilovers! I've been working on this 4-link for about a year. Getting these coilovers mounted was a little more difficult than I had anticipated. None of this project was easy, but I am a horrible perfectionist. I am a professional...
  10. notaf-ingjeep

    how big?

    I just finished my links last night for the rear 4-link I've been planing to build for years. I am going to run my soa shackle reversal in front, coil overs in rear keeping my 35's. I was thinking about 12" coilovers, but what do some of you guys with coilover experience think. I plan to...
  11. notaf-ingjeep

    Push pull hydro

    What is up, haven't been around in a while, but I have an idea wanted to know some opinons. My crusier is still running the push pull stock type p.s. box. I want to Port this box and mount a small hydro ram 1.5 or 1.75 to the frame and build a pimp (L shaped arm) from some really high grade...
  12. notaf-ingjeep

    fj 60 axle swap

    I've been searching but havent found the answer i am looking, for thougt someone could answer it for me. Ijust got a new welder and i'm itching for a project want to swap fj60 axles in to my 74 fj40 I have new lockers in my fj40 axles and want to swap my diffs. I have found posts on swaping...
  13. notaf-ingjeep

    A-frame suspension

    I just got home from the moab easter safari, and i met this guy running a rear A frame suspension on upper helldorado. I had never seen it before, He had an A frame welded solid the the axle, a cross member with a huge "ball joint" that he took off a road grader mounted in the center of the...
  14. notaf-ingjeep

    new transfer case

    well i just got my new orion transfer case, is there anyway to remove the tranfer without having to remove the stock 4 speed trans. i was thinking if i were to remove the cross member and lower the hole drive train with a floor jack i might be able to remove the transfer, is this possible.
  15. notaf-ingjeep

    removing axle shafts

    I cant figure out how to get to remove the c locks to remove my axle shafts from a detroit locked rear axle.
  16. notaf-ingjeep

    hydro assist

    Has anyone ever seen someone port a p.s. box that mounts in the back of the front fender, or is even possible. I am running one that was swapped in from a pickup i think.
  17. notaf-ingjeep

    locker problem

    Recently my rear detroit has been causing me some trouble. I dont know exatly what it is doing but when i reverse it will catch and then pop it does it when i accelerate when turning at slow speed. I know that it is normal for a detroit to do this some but it has gotten worse. I recently...
  18. notaf-ingjeep

    tbi problem

    ok, get this, I finally got my long awaited chip from chet wagner and it doesn't run right. first off it doesn't start by turning the key all of the time i have to give it a little bit of throttle for it to turn over. Second, when i first start it after it has sat for a while it will idle...
  19. notaf-ingjeep

    land cruiser fuel injection

    i have a downey fuel injection kit on my cruiser and i need a chip to get it to run decently. does any one know the best place to order a chip from. i thought of calling turbo city but i am not sure. I would rather not deal with downey ever again.
  20. notaf-ingjeep

    h41 tranny

    I am planning on swapping an h41 tranny in to my cruiser. &nbsp:Does anyone know strong is this tranny compaired to a sm420 or sm465. This tranny seems like a better swap for me seeing how it just bolts in to my drive train
Back
Top Bottom