workingdog
GOLD Star
- Thread starter
- #21
I'd love to see where the box sits and the pitman arm.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
So, last time I did this, not having a good dolly for the axles was a PITA. So this time, I was thinking of building one, but decided to save a day of my life I'd never get back and buy one from Eastwood.
Well, it would have worked for the dana 44's I used last time. which are heavy but ... not horrible. But the Ultimate Dana 60 is just way too heavy. I mean, the dolly holds it up - mostly. But there's no way to get them to sit level. The diff housing too heavy and which ever way you rotate the hubs, the entire axle goes that way. The rotor and caliper assembly must weight 100 lbs all together.
So, going to just go to 3 jack stands and use the gantry when I need to move it. And, I need to get a tie rod on the thing just to keep the turning assemblies from shifting and killing me.