Dissent
Questioning my life choices...
I am moving my Puma back to the passenger side on an LCP Puma Mount. I need a quick disconnect plate of some sort to be able to quickly remove it now and then. I need access to my fuse panel and aux. wiring setup behind the cubby door. It has been bolted on that platform before but I moved it to the drivers mount to get to the wiring area and planted my Water Bricks there but now it's coming back to the passenger side.
I've seen bass boat seat mounts that could work but the inserts (piece that mounts to the seat) swivel. I can't find a stationary mount. I've considered HD clevis pins and springs in conjunction with the rubber feet but I don't think I can get the tension needed to keep it from rocking.
I'm investigating throw-lever bolts similar to mountain bike hubs but I don't think I have enough room on the wall side. Considering a hold down bracket on the wall side to slide the compressor into then fasten with the throw-lever but the fridge will be close and all that may not work.
A sliding mount, towards the 2nd row, on short drawer slides is also a consideration.
Anyone have any slick ideas?
I've seen bass boat seat mounts that could work but the inserts (piece that mounts to the seat) swivel. I can't find a stationary mount. I've considered HD clevis pins and springs in conjunction with the rubber feet but I don't think I can get the tension needed to keep it from rocking.
I'm investigating throw-lever bolts similar to mountain bike hubs but I don't think I have enough room on the wall side. Considering a hold down bracket on the wall side to slide the compressor into then fasten with the throw-lever but the fridge will be close and all that may not work.
A sliding mount, towards the 2nd row, on short drawer slides is also a consideration.
Anyone have any slick ideas?