Hi Guys,
I have an oil pressure gauge that is not working. I have purchased a new oil pressure sender and installed it. When I inserted the clip back onto the sender and tested it the gauge still did not work. I also checked all my fuses.
I then noticed another clip on the same cable that connected to the sender. In all my wisdom I decided to connect this clip instead to check if it works. When I started the motor the oil pressure gauge appeared to work just fine.
I went for a quick drive and noticed 'steam/mist' behind my console glass. I shut the engine down.
I now appear to have burnt out the coil or something behind the instrument cluster. Could kick my own backside.
What is that other clip and why is is not connected. Also why does my pressure gauge not work? (before I munted it)
What is the best aftermarket pressure gauge I can get for my cruiser?
Where will I be able to get a new instrument console?
I have an oil pressure gauge that is not working. I have purchased a new oil pressure sender and installed it. When I inserted the clip back onto the sender and tested it the gauge still did not work. I also checked all my fuses.
I then noticed another clip on the same cable that connected to the sender. In all my wisdom I decided to connect this clip instead to check if it works. When I started the motor the oil pressure gauge appeared to work just fine.
I went for a quick drive and noticed 'steam/mist' behind my console glass. I shut the engine down.
I now appear to have burnt out the coil or something behind the instrument cluster. Could kick my own backside.
What is that other clip and why is is not connected. Also why does my pressure gauge not work? (before I munted it)
What is the best aftermarket pressure gauge I can get for my cruiser?
Where will I be able to get a new instrument console?
Last edited: