- Thread starter
- #41
Tub is on. No pics of install as I was too busy aligning all the bolts and bushings...
-Geoff
-Geoff
Builds 1984 Desert 40 - Teardown and Rebuild (1 Viewer)
- Thread starter jgeoffr
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #42
More tub on porn. this thing is talk with the lift and the bigger 16" tires. Currently have the FJ60 rims on he truck but will likely swap back to the splits. I've got something like 10-12 splits to pick from.
More ground clearance than a H2!
-Geoff
More ground clearance than a H2!
-Geoff
- Thread starter
- #43
Fenders and aprons painted and rear sides on.
-Geoff
-Geoff
- Thread starter
- #45
Custom stainless windshield hinge, brass bushings from @SouthBostonFJ40 and more stainless hardware from Overland Metric. OE windshield catch knobs and custom stainless spacers.
-Geoff
-Geoff
Michael B
SILVER Star
Some of your height will diminish as weight is added.
- Thread starter
- #47
Roof prep and drip rail fitting. Clecos to the rescue.
-Geoff
-Geoff
- Thread starter
- #48
- Thread starter
- #49
Drip rail rivets in. Used Tatco rivet squeezer and solid aluminum rivets from McMaster-Carr.
-Geoff
-Geoff
- Thread starter
- #50
Windshield header riveted in. Used flat head solid aluminum rivets from McMaster-Carr. Final prep and paint of roof underside.
-Geoff
-Geoff
- Thread starter
- #51
Top with partial paint and seam sealed with 2-part sealer.
-Geoff
-Geoff
- Thread starter
- #52
Roof final paint and polish.
-Geoff
-Geoff
- Thread starter
- #53
Fuel tank and majority of associated system installed. New fuel tank strap rubber from Australia. No easily identifiable supplier in US for 40mm width.
-Geoff
-Geoff
- Thread starter
- #54
Steering components going in. New brake and clutch masters. Rebuilt steering with new switches and bearing. Pedal bucket rebuilt.
-Geoff
-Geoff
- Thread starter
- #56
Windshield and door/pillar bracing in.
-Geoff
-Geoff
- Thread starter
- #57
Fenders, aprons, bin, and hood on so adjustment can begin.
-Geoff
-Geoff
- Thread starter
- #58
More to follow... hopefully on a more regular basis!
-Geoff
-Geoff
- Thread starter
- #59
4 speed and split transfer case cleaned and ready for teardown.
-Geoff
-Geoff
- Thread starter
- #60
Semi-truck related. Rebuilt a Blue Point rolling cart so i don't have to take all my tools home each day. Painted 416 and stickers up.
-Geoff
-Geoff
