SmoothLC's latest activity

Hey, got the part number for those? (I know, I'm lazy and don't want to look it up. I replaced the main headlights a couple months ago.)

4% tint on the cargo area and 15% on the other windows, doing my best to keep the Aussie sun out

What a beautiful, black shining example of high quality automobile, designed and manufactured to an exacting standard, that brings joy to both the drivers and onlookers alike. The other is a POS Bentley.

Yeah, full custom to replicate OE - first and second rows (rebuilding foam), arm rests, head rests, and center console - $2,800 materials and labor

I picked up the 100 yesterday and I couldn't be happier. The first thing I had to do was adjust the mirrors. I knew the old foam - 20 years and 200,000 miles - had collapsed a bit. Since it was my ass in that seat for 15 of those years and...

Sounds like we have the same parts guy. Got mine installed earlier this year with new glass and everything's "marvelous." LOL.

Over the weekend, I replaced the SPC UCA Upper Balljoint Assemblies with the new sealed version, put OME 863 coils in the back to reclaim some of the lift that the RTT took from me, and tightened up the TB's to get back to the 22.25" I was after...

My partsguy/fellow Cruiserhead recommended 200 series wipers when I went to order refills from him. Said they're better and the refills are cheaper. They're def. longer than the 100 stock ones.

Ordered it on Thanksgiving, received it in February and finally got off my ass to install it. Serious question here, how long did it take you guys to install it with a winch? Embarrassed to say it took me and my dad almost 12hrs with small breaks...

Wow! $325 for the front DS seat top and bottom. Sounds too good to be true! I've got a seat cushion sitting in my garage waiting. 40 to 60 minutes to install according to their website - seems ambitious for those of us who haven't done it before.

I finished the front seats. Ended up buying from USAutoseatnation.com I am very pleased with the quality and the results. The fit was perfect and the color match is spot on. If you do it yourself, budget a whole day for the two front seats...

So Jasper does reman'd differentials. Given the scenario, why else would it have reman'd diffs other than what @hoser suggested? Might suggest you do a little more digging. Maybe there's more to the story than it appears.

Definitely, I’ll get some first thing in the am. I know the actuator motor is there, but I don’t know if the internals are. I’m assuming it’s all there, axles just getting built and going down the assembly line just didn’t get wired to the dash...

Thank you to everyone who has been reaching out via direct message! Just wanted to show the difference in color tone because the question of warm white versus xenon white comes up so much!

Well, all done now. I had to cut off 4 of the 12 dust caps. Those suckers are very hard. For me, half the hobby is maintaining the truck. It’s not my only LC, so I’m rarely in a rush, and my street cred on fixing things will make me that much...

I started changing the spider bearings in the driveshafts. This is a much bigger PITA than I expected. I've had to take a cutoff wheel to 3 out of 10 dustcaps thus far, because I can get on side off, but the other will not start straight going...

older radiators are brittle? But I’d bet that’s not the only damage. Front suspension, steering rack, engine mounts… Them Duke boys went through a heap of Chargers runnin’ from the law.

Beautiful 100 with M19V2 (Baja Designs Squadron mount)

Im really happy with them. yeah they cover the pockets and it has its own pocket, they also sell an add-on organizer with additional pockets that is pretty cool but didn't feel like spending the extra money

fun to see fellow skaters.. and if this is unrelated, please feel free to delete, or move to another section. After seeing a kid at our school riding an electric skateboard, i decided to build my own a few years ago… CNC motor mounts on...

Just wanted to do a follow up incase someone else is looking to do a similar setup. I was able to fit an IKamper Skycamp Mini, and a horizontally mounted Roam 95L case behind it on my Front Runner Slimline 2 Rack. The IKamper Mini was able to be...

:hmm::hmm::hmm::hmm::hmm::hmm:

I installed 555 inner and outer tie rods with some new rack boots. Did the alignment by myself with a tape measure! Then had my buddy laser align it and it was almost dead on with my tape measure.

Pinecrest Lake, CA Very old (not mine) vs old (mine) 😂

I love the look, but specifically didn't want the tech. That's why I specifically bought the LC100. My other car is a NC Miata. Same thing, all fun, no tech. It's the perfect balance for me, but not for everyone. Enjoy!