OffRoadScott's latest activity

Fingers crossed.

Yesterday I replaced the console speaker in my LX, and cleaned up the mess under shifter console. Found 90 cents in coins hiding in there. Now 6 of the 7 original speakers are new and improved. Decided to do this after getting a replacement...

Cheers

Cheers

Pulled out the rest of the intercooler/hoses, all pretty dirty with a layer of corrosion. I plan on polishing the aluminum tubes to get them looking nice before installing into the 80 The intercooler itself looks like it was installed when the...

Sprayed all the hollow spaces with a wand (360* nozzle) and 2k epoxy primer at the end of the day. It floods the cavities a lot and makes a mess. We wipe the excess as we go. I will spray over the top of the overspray when I coat it all...

You won’t get 275whp without upgrades. Stock an FTE is a bit lack luster, best you could expect stock is 120rwhp. That’s at sea level in perfect running condition without a bunch of soot clogging it up. My new 1FZFE produces 115hp being full time...

Today escalated quickly, I was just going to pull the shifter console but said screw it. I've had some killamat laying around forever so im going to put that down sometime. If anyone has a good strategy for removing the left over padding that...

I've decided to take on a little project comprising of a Warn 8274 and an ARB winch bar over the next couple of weeks.

Agreed! I really like mine too! ALL of them…even the ones not pictured. Fn sickness!

Back together somewhat and off to my friends house to finish the mechanical stuff.

I found this weird cart for free at a ham fest. It held some rolling electronic stage equipment. I put my laptop on it and now I have a rolling FSM.

Heading out to Loon lake in the morning for the Rubithon should be a blast !! I think I'm ready, well be meeting up with the guys from the Rising Sun Club 💪 :cool: can't wait.

One more, happy with this. Cheers

Hood ready for 2k epoxy primer. Big Bertha Sand blaster kept it “light” which is what I asked for. 2/3rds of the roof needed stripped back which Big Bertha makes quick work of. Glad we did, found a half dozen or so micro rust spots under...

attic rack! Installed - Zip tied right now - to be redone ……when i get that front row cargo net - i will be posting the speski cargo barrier in classifieds end of august - local pickup only And right now - none of the items up there can get past...

I have done the FTE conversion so you can check the thread too: 1hd-fte conversion in process - https://forum.ih8mud.com/threads/1hd-fte-conversion-in-process.1153912/ Bear in mind that you will need some extra stuff to make the conversion: *...

Thank you. I will take a look later tonight.

I highly recommend Import Quality JDM Cars from Japan | Japan Car Direct - https://www.japancardirect.com/, make an account and start looking at auctions, you can get an idea of what HDJ100's are going for, I got mine pretty cheap. I think...

And the current , no good, intake hose set up

Finished painting the air box and started install I don’t really have the proper hoses to go to a stock turbo and also don’t really like that the current one isn’t sitting flush. I don’t need to drive it so will either swap the aftermarket turbo...

Cheers

I recently made these shelves. The one now permanently houses this old laptop for FSM duty.

Never Realized for $55 that I could turn my Cores into this. Do not pay $100 for the Napa Reman like I did, when you can get this for $60. I would get a New Bajo Bolt for the Brake Line and Washers while you are there. I forgot. ** Just an...

Bowfin rack, Touge Nation stripes and new OEM mud flaps installed. I think this is it's final form! -Rob