Land Shark's latest activity

Johnny, how much more line do you think you could spool on your 8274? TIA

https://www.go2marine.com/Samson-AMSTEEL-BLUE-Rope?quantity=1&length=1242 $2.27 per foot. 3/8" amsteel blue, numerous colors. I called them, their splice guy put a soft loop eye on one end and a tight wrap on the other to insert in winch drum.

yes that one. thanks

are you talking about the water can on the right side of the cargo area? I can take a better pic for you, but it's a simple Scepter can with a coffee dispenser spigot and a clear tube for reading the level.

in my 100 i removed the middle seats for a trip out to MOAB this year. Used a 3/4" piece of plywood and bolted it down to the seat anchors. end goal is to wrap it with outdoor carpet and thru bolt tie downs

I've got a 1990 HDJ81 that has a TrekBoxx drawer system all the way back, but I am looking for ideas from anyone who may have done a backseat delete. We travel with our dog so I am thinking that I want to build something that will be flat, but I...

can you get me a better pic of that water set up?

mine rubs lightly so I must've mounted mine as high as possible. I need to be more cognizant of when I open/close the hatch to minimize this rubbing. friend of mine took these night time shots with his Galaxy phone four years ago. I hang...

For those with smaller rigs, 40's, 70 series I did research to see which 270's were the lightest & shortest. For weight & size I found that Ironman's XTR71 & the 23Zero offerings were the lightest & shortest out there. I went with the Ironman as...

I need to sort out the hatch rubbing on the rear awning support...don't really want to move the awning up on the mounts any more, so that one may get a piece of pipe insulation. I dig the pool noodles for rain support Might have to employ that...

I posted this in another forum but it belongs here as well: copy/paste Last weekend was the first test of rain water not pooling with the noodles. It rained all night off and on, even hailed at one point. In the middle of the night I was able...

Picked these two stoves up last year, only just got them out to have a good look at them. The Coleman is a 425C in pretty decent shape, will probably give the whole stove a scrub and clean out the tank, then see how it burns and if it needs...

Well, i guess I have to eat my words and partially retract my complaint. Recently my Dometic fridge kinda died. I say kinda because I got an error message on the screen that couldn't be cleared no matter what I tried. The fridge itself would...

Definitely not worth it if you are driving enough. A can of sea foam helps as well if you dont.

Plenty of suggestions here but I'll share what worked for me after struggling to get 5 of the 16 screws loose. I got 11 free with Kroil and an impact driver. The others were stubborn. I used a 1/8 bit to get a pilot hole. The deep screw ears...

If you think your driver bit is slipping back in the screw slots, add a dab of valve grinding compound into the slots. The abrasive of the valve grinding compounds adds some extra bite which just might do the trick.

Something to keep in mind with the impact drivers is the bits that typically come with impact drivers are what I'll call "standard Phillips bits". Toyota uses JIS fasteners, and it would be better to use a JIS bit. (JIS = Japanese Industrial...

Being from FL, he may like mud....I know just the trail!

Except for that Stump guy... What kind of a name is that anyway?

Signed up for the first time, coming from FL.

All- sure appreciate the insights and thoughts! I’m thinking along the line of putting the dollars into making it running sound and will keep you posted on the tub decision. Glad this forums here to bounce ideas around.

Seesh life is hard when you dont know how and what you are doing. I made a mistake with my planning. When i removed the rivets i did this in one go not realising there are parts which are riveted to inner frame and parts which are riveted to the...

Pictures ! So I'm in full preparation mode. I think I got everything set up and need to only paint four brackets until Friday. I reassembled the frame and started to fit in some of the parts which are beeing riveted on. I hope we can do this...

🎶🎹” that’s what friends are for” 🎼🎻🎺🥁🎷 Dione Warwick

Most of the larger gas stations here have ethanol free pumps as well, I just drive my 40 so much I got tired of spending an extra $1 a gallon on the high test.